Abstract:Carbon capture and storage (CCS) from fossil and biogenic (BECCS) emission sources is necessary to limit global warming to well below 2°C. The EU as well as Swedish national agencies emphasize the importance of CCS for emission intensive industries. However, the cost of implementing CCS is currently still higher than the cost of emitting CO2 via the EU ETS, for example. To incentivize rapid deployment of CCS, the concept of partial capture has been suggested, i.e. capturing only a fraction of the site emissions to reduce capture cost. Several studies have found that the utilization of excess heat from industrial processes could significantly reduce the capture cost as the heat required (~120°C) may be available in significant quantities. However, available excess heat will not be sufficient to power full capture at most industrial sites. In Sweden, many industries utilize all or part of their excess heat in heat recovery units or in combined heat and power (CHP) plants to produce electricity and deliver heat to municipal district heating (MDH) systems. A broad implementation of CCS will, thus, effect the availability of excess heat for industrial heat and power generation. The future product portfolio of industrial processes with excess heat export and CHP plants can therefore be expected to include not only heat and power production, but also climate services (CCS/BECCS) and grid services (frequency regulation due to intermittent renewables). The aim of this work is to assess partial capture at sites that have access to low-value excess heat to power the capture process, whilst considering competition from using the excess heat for MDH delivery. The work is based on process modelling and cost estimation of CO2 capture processes using amine absorption for two illustrative case studies, a refinery and a steel mill, which both currently use excess heat for MDH. The main focus is on investigating how seasonal variations in the availability of excess heat as well as the demand of district heating impact cost-efficient design and operation of partial capture at industrial sites. A challenge when utilizing excess heat in connection to a process connected to a district heating system is that the heat source which can be used to power part of the capture process will exhibit seasonal availability, and thus may inflict extra cost for the CCS plant not running at full load, and therefore may counteract the economic motivation for partial capture. To prevent this, heat integration between CCS and municipal district heating is investigated, for example by utilizing heat from the CO2 compression so that low-pressure steam is released from MDH to provide heat to capture CO2 whilst maintaining MDH supply. The design of the amine absorption capture process will have to handle significant load changes and still maintain high separation efficiency within hydrodynamic boundaries of the absorber and stripper columns. The cost of such operation will depend on the solvent circulation flows, the number of absorber columns (including packing and liquid collectors/distributors) and capacity of solvent buffer tanks for storing unused solvent during the winter season. Assuming that a constant amount of CO2 is avoided, the avoidance cost of CCS based on excess heat with seasonal heat load variations is compared to the avoidance cost of CCS based on the use of external fuel to achieve a constant heat load to the reboiler.

Feasibility of Integrating Solar Energy into A Power Plant with Amine-Based Chemical Absorption for Co2 Capture

Techno-Economic Evaluation on Solar-Assisted Post-Combustion CO2 Capture in Hollow Fiber Membrane Contactors

Thermo- economic feasibility of solar-assisted regeneration in post-combustion carbon capture: A diglycolamine-based case

Economic and operational assessment of solar-assisted hybrid carbon capture system for combined cycle power plants

A comparative life cycle impact assessment for solar heat integration in post-combustion carbon capture

Optimizing post-combustion carbon capture: A comprehensive 3E analyses of energy, exergy, and exergoeconomic aspects with solar integration

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Process simulation and techno-economic analysis of CO 2 capture by coupling calcium looping with concentrated solar power in coal-fired power plant

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

An integrated de-carbonization supercritical coal-fired power plant incorporating a supplementary steam turbine, process heat recovery and a modified boiler structure

Design of a Parabolic Trough Collector Solar Field for a Pilot CO2 Capture Plant from Natural Gas Combined Cycle Power Plant Flue Gas

Techno-economic Study of Carbon Capture from Coal-fired Power Plant Using MEA Assisted by Solar Organic Rankine Cycle for Power Generation

Process and Integration Optimization of Post-Combustion CO2 Capture System in a Coal Power Plant

Economic Analysis of CO2 Separation from Coal-Fired Flue Gas by Chemical Absorption and Membrane Absorption Technologies in China

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

Performance and economic viability assessment of a novel CO 2 adsorbent for manufacturing and integration with coal power plants

Indirect integration of thermochemical energy storage with the recompression supercritical CO2 Brayton cycle

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Reducing initial barriers for CCS deployment on pulverized coal-fired power plants in China by optimizing the capture ratio of carbon dioxide

Efficient utilization of industrial excess heat for carbon capture and district heating

Post-combustion emission control of a gas turbine cooperated solar assisted CO2 based-reforming utilizing CO2 capture technology