Abstract:Limited by stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and transverse mode instability (TMI), it is challenging to achieve high-power laser output in ytterbium-doped fiber (YDF) lasers with operating wavelengths less than 1060 nm. In high-power fiber lasers, bi-tapered YDF can provide a balance between the suppression of SRS and TMI. In this work, we designed and fabricated a new double-cladding asymmetric bi-tapered YDF to suppress ASE and SRS in the 1050 nm monolithic fiber laser. The asymmetric bi-tapered YDF has an input end with a core/cladding diameter of ~20/400 μm, a middle section with a core/cladding diameter of ~30/600 μm and an output end with a core/cladding diameter of ~25/500 μm. The working temperature of the non-wavelength-stabilized 976 nm laser diodes was optimized to improve the TMI threshold. An output power of over 5 kW with an efficiency of 83.1% and a beam quality factor M2 of about 1.47 were achieved. To the best of our knowledge, this represents the highest power nearly-single mode in 1050 nm fiber lasers. This work demonstrates the potential of asymmetric bi-tapered YDF for achieving a high-power laser with high beam quality in 1050 nm fiber lasers.

Strict single-mode high power 1018 nm fiber laser operating in multimode Yb-doped fiber

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

Mode-locked Yb-doped fiber laser with graded-index multimode fiber as saturable absorber with gain management

Narrow Linewidth Tm3+-Doped Large Core Fiber Laser Based on A Femtosecond Written Fiber Bragg Grating

10-W Cladding-Pumped Fiber Laser with Single Transverse Mode Output

A 1150-W 1018-Nm Fiber Laser Bidirectional Pumped by Wavelength-Stabilized Laser Diodes

24 kW 1045 nm narrow-spectral-width monolithic single-mode CW fiber laser by using an FBG-based MOPA configuration

Chemotherapy for advanced pancreatic cancer.

Towards a new strategy for dental health.

High-efficiency sub-watt in-band-pumped single-frequency DBR Tm3+-doped germanate fiber laser at 1950 nm

Slope efficiency over 30% single-frequency ytterbium-doped fiber laser based on Sagnac loop mirror filter

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

High-temperature-insensitivity high-power Yb-doped fiber laser directly in-band pumping by 1018 nm laser diodes