Research on the Influence of Polyaluminum Chloride and Benzotriazole on Membrane Fouling and Membrane Desalination Performance

Yong Suo,Siyao Chen,Yongsheng Ren
DOI: https://doi.org/10.1016/j.jece.2021.106676
IF: 7.7
2021-01-01
Journal of Environmental Chemical Engineering
Abstract:The behavior and mechanism of nanofiltration membrane fouling in the process of membrane water treatment, as well as the effect of fouling on membrane desalination efficiency are studied. NF90 was selected as the experimental membrane, and the target pollutants were 5 kinds of inorganic salts (NaCl, Na2SO4, CaCl2, MgCl2 and KCl), polyaluminum chloride (PAC) and benzotriazole (BTA). Various membrane samples were characterized by SEM, and the cation concentration was measured by ion chromatograph (HPIC) quantitatively evaluate the influence of membrane fouling on ion rejection efficiency. The results showed that PAC, followed by inorganic salts and BTA, mainly caused membrane fouling. PAC always preferentially formed larger and loosely attached fouling layer on the membrane surface. BTA is adsorbed on the surface of the membrane and the fouling layer, increasing the adhesion between the fouling and the membrane and the cohesion between the fouling. Contrary to BTA, PAC has the opposite interception effect on inorganic salts, and the denudation effect of cross-flow shear force on the membrane surface keeps the membrane pores always high permeability. The effect of fouling on the rejection of inorganic salts is consistent with the results of ion concentration determination.
What problem does this paper attempt to address?