Abstract:Inevitably increase in plastic demand has resulted in an overgrowing production on a global scale. The utilization of plastics has been applied to a number of industries as it is a durable, moldable, and inexpensive material. High exploitation of plastic had resulted in a hefty amount of waste production, which is not easy to recycle due to its non-degradable nature and results in landfills. Nowadays, waste to energy processes such as pyrolysis has emerged as a superlative process for the management of plastic waste by converting it into useful products. On the other hand, the employment of carbon nanotubes (CNT’s) has shown high growth in their production. CNT’s were generally synthesized from conventional gases like methane, ethane, and ethylene. Plastic waste can be utilized to substitute the feed material for the CNT synthesis via pyrolysis method. In this study, a two-step pyrolysis process was investigated for product recovery and CNT’s production. The first steps consisted of catalytic and non-catalytic degradation of mixed plastic waste in a vertical fixed bed reactor at 500 °C with a heating rate of 20 °C/min for the production of pyrolytic oil and gases and were analyzed. The second step consists of the employment of catalytic pyrolysis gases in a horizontal tube reactor maintained at a temperature of 800 °C over a bed of catalyst for the synthesis of CNT’s via catalytic vapor deposition (CVD) technique. It was established that the use of catalyst decreases the oil phase production from 80.5 to 64%, char from 9 to 6.5% while an increase in gas phase production from 10.5 to 29.5% was reported. The alteration of hydrocarbons to CNT’s was investigated via pre- and post-GC analysis of the gas samples. Post gas investigation indicates an increased concentration of hydrogen in the sample. Also, the decline of hydrocarbon gases concentration was observed in post sample analysis. Also, transmission electron microscopy (TEM) analysis confirms the synthesis of CNT’s.

Synthesis of Carbon Nanotubes via Liquid Injection Chemical Vapour Deposition as a Vector for the Chemical Recycling of Waste Composite Carbon Sources

On the Use of Carbon Cables from Plastic Solvent Combinations of Polystyrene and Toluene in Carbon Nanotube Synthesis

Upcycling of Face Masks to Application-Rich Multi- and Single-Walled Carbon Nanotubes

Chemical vapor deposition growth of single-walled carbon nanotubes from plastic polymers

Carbon nanotubes production from real-world waste plastics and the pyrolysis behaviour

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Production of carbon nanotubes via catalytic pyrolysis of waste plastics over Ni/Al 2 O 3 catalyst: The influence of plastic types

High-yield Production of Carbon Nanotubes from Waste Polyethylene and Fabrication of Graphene-Carbon Nanotube Aerogels with Excellent Adsorption Capacity

In-situ fabrication of multifunctional N-doped hybrid carbon nanotube@carbon fiber by recycling gaseous effluents of carbon fiber production

Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes production

Waste to Value-Added Product: Developing Electrically Conductive Nanocomposites Using a Non-Recyclable Plastic Waste Containing Vulcanized Rubber

Carbon nanotubes synthesis over coal ash based catalysts using polypropylene waste via CVD process: Influence of catalyst and reaction temperature

Feasibilities of producing high-value carbon nanotubes from waste plastics by spray pyrolysis

Recent advancements in the use of plastics as a carbon source for carbon nanotubes synthesis - A review

Physical Properties of Industrially Produced Carbon Nanotube Yarns for Use in Structural Nanocomposites

Boost Up the Mechanical and Electrical Property of CNT Fibers by Governing Lyotropic Liquid Crystalline Mesophases with Aramid Polymers for Robust Lightweight Wiring Applications

Production of carbon nanotubes via catalytic pyrolysis of polyethylene over Ni/ZSM-5 prepared by ethylene glycol assisted impregnation

Application of Carbon Nanotubes from Waste Plastics As Filler to Epoxy Resin Composite

Recyclable and Electrically Conducting Carbon Nanotube Composite Films.

Carbon Nanotube Wools Directly from CO2 By Molten Electrolysis Value Driven Pathways to Carbon Dioxide Greenhouse Gas Mitigation