Abstract:Electrochemical reduction of CO2 (CO2ER) into value-added chemical feedstocks and liquid fuels using renewable energy is a promising route for CO2 recycling.[1] The major challenges are the large overpotential for CO2 activation and the competitive H2 evolution in aqueous mediums.[2] Although some nanostructured noble metal catalysts have demonstrated impressive electrocatalytic activity and selectivity for CO or formate production over CO2ER, the low abundance and high cost limit their large-scale applications.[3] Efficient and cost-effective electrocatalysts with high energy efficiency and product selectivity are highly desirable to drive the development of CO2ER. In our study, we developed a low-cost Sn particle modified N-doped carbon nanofiber hybrid catalyst via a straightforward electrospinning technique coupled with a pyrolysis process.[4] Its electrocatalytic performance was tuned by the coverage of Sn nanoparticles and the structure of N species on the nanofiber surface. The pyridinic-N supported Sn nanodots drove efficient formate formation with a high current density of 11 mA cm-2 and a faradaic efficiency of 62% at a moderate overpotential of 690 mV. After a simple acidic leaching treatment, only atomically dispersed Sn species remained on the surface of pyridinic-N-doped carbon nanofibers. This catalyst dominantly promoted the CO2-to-CO conversion with a high faradaic efficiency of 91% at a low overpotential of 490 mV. The change of product selectivity was attributed to the difference in local chemical and electronic environment (Sn-Sn or Sn-N) surrounding the Sn active sites, which facilitated different intermediate stabilization and reaction pathway. The abundance of Sn nanodots and the strong electronic interaction between Sn and pyridinic-N-doped carbon may promote the formate formation, while the efficient CO production over the Sn atoms modified nanofibers may arise from the intrinsically high activity and selectivity of the formed Sn-N moieties. References [1] J. Qiao, Y. Liu, F. Hong and J. Zhang, Chem. Soc. Rev., 631-675 (43) 2014. [2] E. E. Benson, C. P. Kubiak, A. J. Sathrum, J. M. Smieja , Chem. Soc. Rev. 89-99(38) 2009. [3] Q. Lu, Jonathan Rosen, F. Jiao, ChemCatChem, 38-47 (7) 2015. [4] Y. Zhao, J.J. Liang, C.Y. Wang, J.M. Ma, G.G. Wallace, Tunable and efficient tin modified nitrogen-doped carbon nanofibers for electrochemical reduction of aqueous carbon dioxide, Adv. Energy Mater., accepted on 16/10/2017.

In-situ fabrication of multifunctional N-doped hybrid carbon nanotube@carbon fiber by recycling gaseous effluents of carbon fiber production

Surface engineering of carbon fiber via upcycling of waste gases generated during carbon fiber production: A sustainable approach towards high-performance composites

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Tandem Conversion of Cyano-/Amino-Organics into N-Doped Carbon Nanotubes and Harmless Off-Gas.

In Situ Construction of Carbon Nanotubes/nitrogen-Doped Carbon Polyhedra Hybrids for Supercapacitors

Fabrication of eco-friendly carbon microtubes @ nitrogen-doped reduced graphene oxide hybrid as an excellent carbonaceous scaffold to load MnO2 nanowall (PANI nanorod) as bifunctional material for high-performance supercapacitor and oxygen reduction reaction catalyst

Continuous and Scalable Fabrication and Multifunctional Properties of Carbon Nanotube Aerogels from the Floating Catalyst Method

Upcycling of plastic waste into carbon nanotubes as efficient battery additives†

Solvent Recyclable Synthesis of Nitrogen‐Rich Nanotubes with Embedded CoFe Nanoparticles for Electrochemical Oxygen‐Involving Reactions

Facile and Scalable Synthesis of Metal- and Nitrogen-Doped Carbon Nanotubes for Efficient Electrochemical CO2 Reduction

A Modified "Gel-Blowing" Strategy Toward The One-Step Mass Production Of A 3d N-Doped Carbon Nanosheet@Carbon Nanotube Hybrid Network For Supercapacitors

Mass Production of Nitrogen and Oxygen Codoped Carbon Nanotubes by a Delicately-Designed Pechini Method for Supercapacitors and Electrocatalysis.

Synthesis of all-biomass-derived carbon nanofibers for dual-functional filtration membranes and oxygen evolution reaction electrocatalysts

Free-standing cross-linked activated carbon nanofibers with nitrogen functionality for high-performance supercapacitors

Tunable and Efficient Tin Modified Nitrogen-Doped Carbon Nanofibers for CO2 Electroreduction

Repurposing Quality-Downgraded Fluorinated Carbon Nanotubes as Eco-Additives in Microgel Composites for Sustained Water Release

Flocculant-Assisted Synthesis Of Graphene-Like Carbon Nanosheets For Oxygen Reduction Reaction And Supercapacitor

Multifunctional G-C3n4 Nanofibers: A Template-Free Fabrication and Enhanced Optical, Electrochemical, and Photocatalyst Properties

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

Two Birds with One Stone: Simultaneous Fabrication of HfC Nanowires and CNTs Through Efficient Utilization of Polymer-Derived Ceramics

Nitrogen-Doped Hierarchical Porous Carbon Nanowhisker Ensembles on Carbon Nanofiber for High-Performance Supercapacitors