Abstract:Abstract Rare‐earth sulfides are of research interest for lithium‐ion batteries (LIBs) due to their abundant lithium intercalation sites and low redox voltage. However, their electrochemical performances are not satisfactory because of poor conductivity and volume change upon electrochemical cycling. Herein, nanoarchitectures of γ‐Ce2S3 encapsulated in a hollow mesoporous carbon nanosphere (Ce2S3@HMCS) are fabricated using the self‐template strategy combined with the in‐sphere sulfuration method and tested as an LIB anode. The void space between the Ce2S3 core and the outer layer of the carbon nanosphere has been properly designed and modulated to achieve excellent electrochemical performance in terms of electronic conductivity, reversibility, and rate capability. The reversible capacity of Ce2S3@HMCS is 2.6 times that of the pure Ce2S3 anode, which can gradually increase and maintain a capacity of 282 mAh·g−1 at a current density of 1 A·g–1, and a high Coulombic efficiency (~100%) can be achieved even after 1000 cycles. This good performance is attributed to the unique yolk–shell nanostructure with a highly crystallized and stable Ce3S2 core and volume expansion buffer space upon lithiation/delithiation. Ex situ X‐ray diffraction and nuclear magnetic resonance results indicate that the lithiation of Ce2S3@HMCS is an intercalation process. This study represents an important advancement in precise structural design with in‐sphere sulfuration and sheds light on a potential direction for high‐performance lithium storage.

Back Cover Image, Volume 3, Number 5, October 2021

Back Cover Image, Volume 5, Number 6, June 2023

Back Cover Image, Volume 5, Number 5, May 2023

Cover Feature: All‐Solid‐State Lithium–Organic Batteries Comprising Single‐Ion Polymer Nanoparticle Electrolytes (chemsuschem 9/2020)

Cover Image, Volume 1, Number 2, December 2019

Back Cover Image, Volume 5, Number 1, January 2023

Cover Picture: Chainmail Catalyst of Fe <sub>3</sub> O <sub>4</sub> @C/CNTO‐Modified Celgard Separator with Low Metal Loading for High‐Performance Lithium–Sulfur Batteries (13/2020)

Yolk–shell Nanoarchitecture for Stabilizing a Ce2S3 Anode

Back Cover Image, Volume 3, Number 1, March 2021

Inside Front Cover: Carbon Neutralization, Volume 2, Issue 2, March 2023

Synergistic Ternary Composite (carbon/fe3 O4 @graphene) with Hollow Microspherical and Robust Structure for Li-Ion Storage.

Cover Image, Volume 2, Number 3, September 2020

Cover Feature: Slurry‐Coated Sulfur/Sulfide Cathode with Li Metal Anode for All‐Solid‐State Lithium‐Sulfur Pouch Cells (batteries & Supercaps 7/2020)

Cover Feature: Preparation, Lithium Storage Performance and Thermal Stability of Nickel‐Rich Layered LiNi0.815Co0.15Al0.035O2/RGO Composites (ChemElectroChem 21/2018)

Front Cover: Dealloyed Nanoporous Materials for Rechargeable Post‐Lithium Batteries (chemsuschem 13/2020)

Cover Feature: A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode (chemelectrochem 9/2020)

Cover Picture: Special Issue: Next Generation Metal‐Ion Batteries (Chem. Rec. 10/2022)

Back Cover: Enhanced Electrochemical Performance of Ti‐Doping Li1.15Ni0.47Sb0.38O2 As Lithium‐excess Cathode for Lithium‐ion Batteries (chin. J. Chem. 12/2017)

Back Cover: Solar RRL 3‐4∕2017

Back Cover: Nanorod and Nanoparticle Shells in Concentration Gradient Core–Shell Lithium Oxides for Rechargeable Lithium Batteries (ChemSusChem 12/2014)

Design of Li2FeSiO4/C/CePO4 composite as a cathode material for excellent lithium storage