Abstract:The use of high-strength steel bars (HSSB), high-strength concrete (HSC) and ultra-high performance concrete (UHPC) in bridge piers can obviously improve bearing capacity and save material consumption. However, the use of high strength materials may detrimentally affect the seismic performance of reinforced concrete (RC) piers. This paper tries to study the seismic performance of RC piers with HSSB and HSC/UHPC by quasi-static tests and seismic fragility analysis. Three RC piers, solid pier with normal strength steel bars (NSB) and normal strength concrete (NSC), solid pier with HSSB and HSC, and hollow pier with HSSB and UHPC, were designed and tested under quasi-static loading. The failure mode, hysteretic performance, stiffness degradation and residual displacement of three specimens were compared and analyzed. A fiber-based beam-column finite element model (FEM) was developed to simulate the nonlinear response of RC piers with HSSB and HSC/UHPC. On this basis, the seismic fragility analysis was performed to study the effects of high-strength materials on the seismic performance of RC piers. Research results show that, compared with NSC piers, HSC piers reinforced with a small amount of HSSB still exhibited slightly larger lateral bearing capacity but lower deformability due to the higher brittleness of HSC. The UHPC hollow pier presented obviously larger deformation capacity, and more slow decline speed of lateral stiffness than NSC and HSC solid piers. Meanwhile, the matching use of UHPC and HSSB in hollow pier can improve the elastic deformation, and then reduce residual displacement of RC piers. The proposed fiber-based finite element model (FEM) can simulate the nonlinear response of RC piers with different high-strength materials with reasonable accuracy. Fragility results demonstrate that, HSC pier presents lower seismic fragility than NSC pier at different damage states except for collapse due to lower ductility of HSC pier. The UHPC hollow pier with HSSB has lower seismic fragility than NSC and HSC solid piers at the same seismic intensity. Overall, the hollow pier with HSSB and UHPC can maintain good seismic performance while greatly saving material consumption.

Seismic Performance of Pre-Fabricated Segmental Bridges with an Innovative Layered-UHPC Connection

Seismic performance of a new type of prefabricated bridge pier with cast-in-place UHPC jacketing

Experimental and numerical study of precast bridge piers with a new UHPC socket column-footing connection

Quasi-static testing of UHPC cupped socket piers-footing connection and its seismic fragility analysis under near-fault ground motions

Seismic performance of precast piers with staggered longitudinal reinforcement-UHPC connection

Probabilistic Seismic Vulnerability and Loss Assessment of a Seismic Resistance Bridge System with Post-Tensioning Precast Segmental Ultra-High Performance Concrete Bridge Columns

Seismic Performance of Prefabricated Square Hollow Section Piers Strengthened by Jacketing Using UHPC and High-Strength Steel

On the mechanical properties of uhpc socket-connected assembled bridge piers

Precast segmental piers: testing, modeling and seismic assessment of an emulative connection based on a grouted central tenon

Seismic Performance of Precast Prestressed Concrete Bridge Girders Using Field-Cast Ultrahigh-Performance Concrete Connections

Seismic Performance of Pre-Fabricated Segmental Bridge Piers with Grouted Splice Sleeve Connections

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Seismic Performance of Precast Segmental Bridge Piers with High- Strength Bars Based on Cyclic Loading Test and Numerical Simulation

Research on the Seismic Performance of Prefabricated Bridge Piers Using UHPC Grout under an Eccentric Load

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier

Connections between precast hollow concrete columns and foundations using UHPC and rebar lap splices

Cyclic Loading Test and Numerical Modeling on Prefabricated UHPC Tube-Confined Rectangular Bridge Piers with Different Base Connections

Seismic Behavior of Prefabricated Thin-Walled CFST Double-Column Bridge Piers

Quasi-static tests and seismic fragility analysis of RC bridge piers with high-strength steel bars and high-strength/ultra-high performance concrete

Research on Seismic Resilience of Prestressed Precast Segmental Bridge Piers Reinforced with High-Strength Bars Through Experimental Testing and Numerical Modelling

Experimental Study on Seismic Behaviour of Precast Piers with Combined Grouted Sleeve Splice and Grouted Central Tenon