Abstract:Quantum cascade lasers (QCLs) are relatively new sources of mid-infrared radiation (between 2.5 m and 25 m), and are very well suited to the application of in-field trace gas sensing, mainly due to their superiority of being robust, compact, wavelength-versatile, narrow line width and low power consumption. All these advantages make the laser absorption spectroscopy based on QCL light sources become one of the most popular technologies for the quantitative chemical detection in a variety of fields including atmospheric environmental monitoring, chemical analysis, industrial process control, medical diagnostics, security or bio-medical studies, etc. In the present work, a highly sensitive mid-infrared gas sensor employing a single continuous-wave distributed feedback QCL and an astigmatic multi-path optical absorption cell is demonstrated for the simultaneous measurement of atmospheric carbon monoxide (CO), nitrous oxide (N2O) and water vapor (H2O). By combining with an adaptive Savitzky-Golay (S-G) filter signal processing algorithm, the detection sensitivity and spectral resolution of the QCL sensor system are significantly improved. Compared with the traditional wavelet transform based signal de-noising technique, the developed adaptive S-G smoothing filter shows obvious advantages in terms of computational efficiency and selection of the optimal filter parameters, namely only two filter parameters (the width of the smoothing window and the degree of the smoothing polynomial) need to be considered. Currently, the QCL sensor system is estimated for the long term measurement of ambient air in laboratory environment. The results show that measurement precisions of 8.20 ppb (1 ppb=10-9) for CO, 7.90 ppb for N2O, and 64.00 ppm (1 ppm=10-6) for H2O at 1 s time resolution and 1 atmospheric pressure (atm) are obtained by using the quadratic differential detection scheme, which can be further improved to 1.25 ppb (for CO), 1.15 ppb (for N2O) and 35.77 ppm (for H2O) by increasing average time up to 85 s, respectively. On the whole, the QCL sensor system has significant features of portability and low-cost, moreover, it can be easily modified for the real-time analysis of other gas molecules through the choosing of corresponding QCL light sources. The QCL gas sensor can be widely used in the field of atmospheric chemistry and other applications. Future work will focus on H2O induced broadening coefficients for CO and N2O transitions near 4.57 m, which will be updated for the developed multi-species QCL sensor system, thus resolving the influence of water vapor broadening effect and achieving the measurement of gas concentration in a high humid environment with sub-percent precision.

Mid-infrared cavity-enhanced absorption sensor for ppb-level N 2 O detection using an injection-current-modulated quantum cascade laser

QCL-based Cavity-Enhanced Absorption Spectroscopy of N2O at 4.5 μm

Quantum Cascade Laser Based Sensor for Open Path Measurement of Atmospheric Trace Gases

Sensitive detection of atmospheric N2O isotopomers using a quantum cascade laser based spectrometer

Quantum Cascade Laser Based Absorption Spectroscopy for Direct Monitoring of Atmospheric N2O Isotopes.

Sensitive Detection of NO Using a Compact Portable CW DFB-QCL-based WMS Sensor.

Intra-Pulse Spectroscopy Based on Room-Temperature Pulsed Quantum-Cascade Laser for N2o Detection

Development of field-deployable QCL sensor for simultaneous detection of ambient N 2 O and CO

Mid-Infrared Absorption Spectroscopy for NO and NO2 Detection in a Flexible Hollow Core Fiber(Invited)

High-accuracy and High-Sensitivity Spectroscopic Measurement of Dinitrogen Pentoxide (N2O5) in an Atmospheric Simulation Chamber Using a Quantum Cascade Laser

Atmospheric N2O Gas Detection Based on an Inter-Band Cascade Laser Around 3.939 Μm

Ppb-level Nitric Oxide Photoacoustic Sensor Based on a Mid-Ir Quantum Cascade Laser Operating at 52 °C

Detection of Atmospheric Multi-Component Based on A Single Quantum Cascade Laser

Nitrous oxide quartz-enhanced photoacoustic detection employing a broadband distributed-feedback quantum cascade laser array

Mid-infrared gas absorption sensor based on a broadband external cavity quantum cascade laser.

QEPAS Based Ppb-Level Detection of CO and N_2O Using a High Power CW DFB-QCL

Mid-infrared Fiber-Coupled Laser Absorption Sensor for Simultaneous NH3 and NO Monitoring in Flue Gases

Simultaneous Detection of Ambient Methane, Nitrous Oxide, and Water Vapor Using an External-Cavity Quantum Cascade Laser

Detection of Nitrous Oxide by Resonant Photoacoustic Spectroscopy Based on Mid Infrared Quantum Cascade Laser

Re-injection off-axis integrated cavity output spectroscopy for the simultaneous detection of N2O, H2O and CO with a mid-infrared QCL laser

Wavelength modulation spectroscopy of nitric oxide using a quantum cascade laser in intermittent continuous wave operation