Abstract:In this study, three typical tube bundle structures with 1.5 m in length are adopted to investigate the effect of different geometries on the detonation propagation behaviors in hydrogen-air mixtures with six different equivalence ratios (Phi = 0.65, 0.8, 1.0, 1.25, 1.5, 2.0). The tube bundle section is created by inserting several smaller diameter pipes (d = 20 mm) into a big tube with 6.0 m long and an inner diameter of 90 mm. Various tube bundle structures can be obtained by varying the number of small pipes. The results obtained from a smooth tube are also given for comparison. Four piezoelectric pressure transducers (PCB102B06) are employed to record the time-of-arrival of the detonation wave, from which the averaged velocity can be obtained. Smoked foil technique is also used to register the detonation cellular structure in the smooth tube. The experimental results indicate that, in the smooth tube, the detonation can sustain a steady velocity when the P-0 is greater than P-c, in which P-0 and P-c represent the initial pressure and the critical pressure. Near the critical pressure, the velocity deficit increases sharply. Below the critical pressure, no stable velocity and cellular pattern can be obtained. In the tube bundle section, the critical pressure and velocity deficit are elevated obviously. Near the critical condition, the velocity deficit is about 30% of the CJ values. Below the critical pressure, the decoupled flame still can sustain a steady velocity at about 0.5V(cj) where V-cj is the theoretical CJ detonation velocity. Finally, the critical condition analysis of the detonation propagation are conducted. The critical conditions can be quantified as D-H/lambda > 1, where D-H is the hydraulic diameter and X. is the experimental measured detonation cell size.

Application and Analysis of Discrete Fiber Probes in Determining Detonation Velocity of Microcharges.

A Flexible MEMS Ionization-Conducted Probe Sensor for Evaluating Detonation Velocity of Microcharges

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

New approaches for evaluating detonation properties of commercial explosives using a novel continuous velocity probe

A Velocity Probe-Based Method for Continuous Detonation and Shock Measurement in Near-Field Underwater Explosion.

Study Of Continuous Velocity Probe Method For The Determination Of The Detonation Pressure Of Commercial Explosives

Application of New Type Ion Probe in Detonation Wave Speed Measurement

Detonation Velocity and Critical Diameter Testing Method for Explosive Based on Pressure-conduct Probe Design

Design of a New High-precision Multiple Fiber Optical Detonation Velocity Meter

Measurement Technology of Stress Wave Particle Velocity in Solid Medium Based on Optical Fiber Coated Probe

The mechanism analysis of noise wave in detonation velocity continuous measurement

Monofiber optical probe using Doppler signals detection for Drop Size and Velocity measurement in air assisted atomization

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of X-Axis and Z-Axis Displacements with Nanometric Resolutions

Analysis and Design of Fiber Microprobe Displacement Sensors Including Collimated Type and Convergent Type for Ultra-Precision Displacement Measurement

Investigation of the Pressure Probe Properties As the Sensor in the Vortex Flowmeter

Study on Continuous Testing Technology of Detonation Velocity of Explosives

Applications of Optical Fiber Probe in Shock-Wave Parameter Testing

A Modified Aquarium Test Using a Continuous Pressure-Conducted Velocity Probe for Measurement of Detonation Pressure

Experimental Investigation of Detonation Propagation in Hydrogen-Air Mixtures in a Tube Filled with Bundles

Experimental Research on Detonation Impulse Measurements in Micro-Scale Smooth Tubes Using a Ballistic Pendulum