Abstract:Open-phase fault (OPF) in the permanent magnet synchronous machine (PMSM) drive system is one of the most prevalent failures due to the resulting large electromagnetic torque ripples and serious mechanical vibration. To improve the reliability of the PMSM drive system, several OPF diagnosis methods were studied and were mainly focused on vector control system. Recently, model predictive control (MPC) has been emerging as a popular control method for the PMSM drive system owing to its simple structure and excellent dynamic performance. However, so far, there are no special OPF diagnosis methods for the model predictive controlled PMSM drive system. Hence, this article first proposes a cost function-based OPF diagnosis method for the model predictive controlled PMSM drive system, considering the characteristics of MPC system. The dc component and second harmonic component in the cost function are used for the OPF diagnosis, and the initial phase angle differences are defined to locate the faulty phase. The experimental results show that, by the proposed fault diagnosis method, not only the OPF can be rapidly detected, but also the faulty phase can be effectively located. Moreover, the proposed method can be implemented simply and is robust against the operating point and parameter variations of the PMSM drive system. This article proposes an OPF diagnosis method for the model predictive controlled PMSM drive system based on cost function, taking into account the characteristics of the MPCC system. The experimental results verify the effectiveness of the proposed method. From the theoretical analysis and experimental results, the following works and conclusion are drawn.

A Hybrid Model-Based Diagnosis Approach for Open-Switch Faults in PMSM Drives

A Diagnosis Method of Semiconductor Power Switch Open-Circuit Fault in the PMSM Drive System with the MPCC Method

Current-Based Open-Circuit Fault Diagnosis for PMSM Drives with Model Predictive Control

Open Circuit Fault Diagnosis of Five Phase Permanent Magnet Synchronous Motor Drive System Based on Hybrid Logic Dynamic Model

Open-circuit Fault Diagnosis for OEW-PMSM Drives Based on Finite-Control-set Model Predictive Control

Cost Function-Based Open-Phase Fault Diagnosis for PMSM Drive System With Model Predictive Current Control

Modeling and Fault Diagnosis of Interturn Short Circuit for Five-Phase Permanent Magnet Synchronous Motor

Data-Driven Based Hybrid Predictive Model for the PMSM Drive System

Open-Switch and Current Sensor Fault Diagnosis Strategy for Matrix Converter-Based PMSM Drive System

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

Current Prediction-Based Fast Diagnosis of Electrical Faults in PMSM Drives

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Fault Diagnosis of Inter-turn Short Circuit Faults in Dual Three-Phase PMSM Drives

Current Residual Vector-Based Open-Switch Fault Diagnosis of Inverters in PMSM Drive Systems

Diagnosis-Free Self-Healing Scheme for Open-Circuit Faults in Dual Three-Phase PMSM Drives

An Open-Circuit Fault Diagnosis Method for PMSM Drives Using Symmetrical and DC Components

A Novel Adaptive SMO-Based Simultaneous Diagnosis Method for IGBT Open-Circuit Faults and Current Sensor Incipient Faults of Inverters in PMSM Drives for Electric Vehicles

Diagnosis of Open-Phase Faults for a Five-Phase PMSM Fed by a Closed-Loop Vector-Controlled Drive Based on Magnetic Field Pendulous Oscillation Technique

Sliding-Mode-Observer-Based Open-Switch Diagnostic Method for Permanent Magnet Synchronous Motor Drive Connected with LC Filter

Common Model Predictive Control for Permanent-Magnet Synchronous Machine Drives Considering Single-Phase Open-Circuit Fault

Fault Diagnosis of PMSM Drives Based on Digital Twin Modeling