Direct current plasma spraying of mechanofused alumina-steel particles

Mohamed Bouneder,Hélène Ageorges,Mohamed Elganaoui,Bernard Pateyron,Pierre Fauchais

DOI: https://doi.org/10.48550/arXiv.0910.4669

2009-10-24

Materials Science

Abstract:Stainless steel particles (60 $\mu$m in mean diameter) cladded with an alumina shell (2 $\mu$m thick and manufactured by mechanofusion) were sprayed with an Ar-H2 (53-7 slm) d.c. plasma jet (I = 500 A, P = 28 kW, \rho_th = 56 %). Two main types of particles were collected in flight, as close as 50 mm downstream of the nozzle exit: particles with a steel core with pieces of alumina unevenly distributed at their surface and those consisting of a spherical stainless steel particle with an alumina cap. The plasma flow was modeled by a 2D steady parabolic model and a single particle trajectory by using the 3D Boussinesq-Oseen-Basset equation. The heat transfer, within the two-layer, stainless steel cladded by alumina, particle, considered the heat propagation phenomena including phase changes. The models allowed determining the positions, along the particle trajectory, where the convective movement could occur as well as the entrainment of the liquid oxide to the leading edge of the in-flight particles. The heat transfer calculations showed the importance of the thermal contact resistance TCR between alumina and steel.