Abstract:Ammonia is harmful to human health, however, the detection limit of the sensor based on traditional semiconductor gas sensors is high and the speed is slow. Constructing heterostructure is an effective method to improve the performance of sensors. In this article, 1-D MoO3 nanorods and SnO2 nanoparticles are successfully combined to obtain MoO3/SnO2 nanocomposite. The 1-D structure can increase the speed of electron transport, while the nanoparticles on the surface increase the specific surface area, more importantly, the structure maximizes the interface area between the two materials which can transfer electronic more efficiently. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH) are used to analyze the microstructure and elemental composition of MoO3/SnO2. The diameter of MoO3/SnO2 nanocomposite is approximately 200 nm and the distribution is uniform. The response of MoO3/SnO2 nanocomposite to 100-ppm NH3 is 12.7 at 280 °C, and the response/recovery time is 13/2 s. The detection limit for NH3 can reach 10 ppb (response 1.3), which enables rapid detection of NH3 at low concentration. Electron transport requires more energy to overcome the contact barrier between pure SnO2 nanoparticles, which can also lead to electron emission and noise increase. However, the sensitive electrons of MoO3/SnO2 nanocomposite can transmit electrons along the 1-D rod-like structure of MoO3, which undoubtedly accelerates the efficiency of electron transmission. Moreover, n-n heterojunction formed between MoO3 and SnO2 to bend the SnO2 band and show better sensitivity to NH3. Therefore, MoO3/SnO2 nanocomposite shows a low detection limit and a rapid response/recovery speed. Nevertheless, the nanoparticles on the surface of MoO3/SnO2 nanocomposite begin to agglomerate with the increase of SnO2 content, which leads to the decrease of gas-sensitive response. The formation process of MoO3/SnO2 composites is also discussed in this article. The excellent gas sensing results show that MoO3/SnO2 composites are a promising gas sensing material.

WO<sub>3</sub> Nanosheets/FeCo<sub>2</sub>O<sub>4</sub> Nanoparticles Heterostructures for Highly Sensitive and Selective Ammonia Sensors

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Fe3O4 nanoparticles modified WS2 microflakes for ammonia detection at room temperature

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Precise Preparation of WO3@SnO2 Core Shell Nanosheets for Efficient NH3 Gas Sensing.

Room-temperature NH3 sensor based on CoFe2O4/PANI composite with porous structure

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

Au nanoparticle-modified ZnO/SnO2 heterojunction nanocomposites for highly sensitive detection of NH3

Serologic and allergenic effects of 3 Mycobacterium paratuberculosis antigens.

Highly Active Co‐Based Catalyst in Nanofiber Matrix as Advanced Sensing Layer for High Selectivity of Flexible Sensing Device

Ammonia sensing by closely packed WO 3 microspheres with oxygen vacancies.

High-Sensitive Ammonia Sensors Based On Tin Monoxide Nanoshells

Design of P–p Heterojunctions Based on CuO Decorated WS2 Nanosheets for Sensitive NH3 Gas Sensing at Room Temperature

Surface Enhancement Effects of Tiny SnO 2 Nanoparticle Modification on α-Fe 2 O 3 for Room-Temperature NH 3 Sensing

2D/2D Dy 2 O 3 Nanosheet/MoO 3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

MoO 3 /SnO 2 Nanocomposite-Based Gas Sensor for Rapid Detection of Ammonia