Abstract:The recycling of end-of-life automobiles has become one of the most important issues facing various countries. At present, the main approach to processing these automobiles involves recycling, which, after dismantling and crushing, creates residual materials known as automotive shredder residue (ASR). ASR is mainly recycled through incineration or landfill disposal, which can cause environmental pollution and waste of resources. Pyrolysis, an emerging ASR treatment method, is widely considered an ideal alternative. While traditional electric pyrolysis has the advantages of high energy consumption and low heating rate, microwave pyrolysis offers higher heating coefficient, lower energy consumption, and greater environmental protection. Therefore, based on the microwave pyrolysis technology, this work investigates the thermal analysis kinetics and pyrolysis of whole components of ASR. The results revealed that the average activation energy of ASR reached 93.476 kJ/mol, as calculated using the Flynn–Wall–Ozawa (FWO) method, and the reaction model was close to the diffusion-control model. Furthermore, the residence time and heating temperature have a great influence on the product composition and yield and affect the occurrence of secondary reactions, and the microwave power influences the rate of ASR cracking and the rate of energy transfer of the products, in which the microwave power has the greatest influence on the gaseous products. The H 2 content increased from 1.097 to 2.565 wt.%, while the methane content increased from 0.781 to 2.687 wt.%. Moreover, the yield of aromatic hydrocarbons in the liquid product increased with the increase of residence time, and the aromatic hydrocarbon product content increased from 31.67 to 44.39 wt.%. Finally, the increase in heating temperature decreased the yield of aromatic hydrocarbons in liquid products, while the increase of microwave power initially decreased and then increased the yield of aromatic hydrocarbons in liquid products. The findings of this work provide theoretical and experimental references for ASR microwave pyrolysis.

Simulation of Two-stage Automotive Shredder Residue Pyrolysis and Gasification Process Using the Aspen Plus Model

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Study on the pyrolysis characteristics and char gasification kinetics of pre-separated automobile shredder residues

Influence of Interactions among Polymeric Components of Automobile Shredder Residue on the Pyrolysis Temperature and Characterization of Pyrolytic Products

Simulation and analysis of coal based syngas methanation process based on Aspen Plus

Study on the Simulation of Source-Separated Combustible Solid Waste Fluidized Bed Gasification Based on Aspen Plus

Simulation of waste tire gasification in bubbling fluidized bed by Aspen: Contribution ratio analysis

Simulation of forestry residue oxygen-steam gasification with Aspen Plus

Simulation of Syngas Production from Municipal Solid Waste Gasification in A Bubbling Fluidized Bed Using Aspen Plus

Feasibility Study on Co-Processing of Automobile Shredder Residue in Coal-Fired Power Plants Via Pyrolysis.

Research on the microwave pyrolysis behavior of automotive shredder residue

Studies on Pyrolysis and Gasification of Automobile Shredder Residue in China.

Simulation and comparison of coal pyrolysis models based on Aspen Plus

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Simulation and experimental of refuse derived fuel pyrolysis based on aspen plus

Simulation of biomass gasification by ASPEN PLUS

Combustible Solid Waste Gasification Gas Characteristics Simulation Based on Aspen Plus

Py–FTIR–GC/MS Analysis of Volatile Products of Automobile Shredder Residue Pyrolysis

Energy, efficiency, and environmental analysis of hydrogen generation via plasma co-gasification of biomass and plastics based on parameter simulation using Aspen plus

Simulation of Municipal Solid Waste Gasification in Two Different Types of Fixed Bed Reactors