Abstract:It is apparent that the population, in general, is increasing and this rise in population increases both the waste production and energy requirements. The main objective of this study to tackle the increasing demand for energy and recycling waste into energy. We will be using Waste to Energy (WTE) technique to convert MSW into energy such as bio-fuel, Hydrogen-rich gas or Syngas. The model of simulation of steam gasification of MSW used in this study is based on ASPEN PLUS. Temperature, the ratio of steam to MSW, and the ratio of air to MSW have all been adjusted in a wide range. For the production of syngas, the impact of carbon conversion efficiency (CCE) and cold gas efficiency (CGE) has been studied. The results showed that by increasing the temperature from 700 °C to 1300 °C the H2 concentration increased from 37 to 51 mol%, CO concentration increases from 35 to 40 mol% and CO2 concentration decreases from 5 to 0.025 mol%. CGE also decreases from 95 to 82% while CCE increases from 80 to 85%. By increasing the steam to MSW ratio from 0.05 to 0.8 mass fraction the H2 concentration increased from 34 to 44 mol% but is maximum at 0.35 at which it is 53 mol%, CO concentration decreases from 43 to 16 mol% and CO2 concentration increases from 0.025 to 8.5 mol%. CGE and CCE also decreases from 94 to 45% and 90 to 44% respectively.And lastly by increasing the air to MSW ratio from 0.01 to 0.5 mass fraction the H2 concentration decreases from 47 to 39 mol% but peaks at 0.05 at which it is 48 mol%, CO concentration decreases from 41 to 31 mol% and CO2 concentration increases from 0.085 to 3.5 mol%. CGE and CCE also decreases from 92 to 55% and 87 to 70% respectively. To compare our data with the base case we have kept temperature at 900 °C S/MSW ratio at 0.11 and air/MSW ratio at 0.05 and it is concluded that our simulation is inline with the base case as our results are off by just 1–3% in terms of yield.

Simulation of waste tire gasification in bubbling fluidized bed by Aspen: Contribution ratio analysis

Experimental Study and Simulation of Low-Temperature Gasification of Municipal Solid Waste in Circulated Fluidized Bed

Study on the Simulation of Source-Separated Combustible Solid Waste Fluidized Bed Gasification Based on Aspen Plus

Simulation of Municipal Solid Waste Gasification in Two Different Types of Fixed Bed Reactors

Aspen Simulation Study of Dual-Fluidized Bed Biomass Gasification

Simulation of Municipal Solid Waste Gasification for Syngas Production in Fixed Bed Reactors

A detailed process model of biomass gasification in bubbling fluidized bed: integration of hydrodynamics into reaction modeling

Combustible Solid Waste Gasification Gas Characteristics Simulation Based on Aspen Plus

Simulation of Biomass Air Gasification in a Bubbling Fluidized Bed Using Aspen Plus: A Comprehensive Model Including Tar Production

Simulation and analysis of coal based syngas methanation process based on Aspen Plus

Gasification Characteristics of Waste Tires in Laboratory-Scale Fluidized-Bed Gasifier

Co-pyrolysis of Corn Stover and Waste Tire: Pyrolysis Behavior and Kinetic Study Based on Fraser-Suzuki Deconvolution Procedure

Modeling of entrained bed coal gasifiers with aspen plus

Simulation of air gasification of Napier grass using Aspen Plus

Aspen plus simulation model of municipal solid waste gasification of metropolitan city for syngas production

Simulation of Underground Coal-Gasification Process Using Aspen Plus

Simulation and experimental of refuse derived fuel pyrolysis based on aspen plus

Gasification of biomass using oxygen-enriched air as gasification agent: a simulation study

Numerical Simulation of an Improved Updraft Biomass Gasifier Based on Aspen Plus

Thermo Chemical Equilibrium Modelling of a Biomass Gasifying Process Using ASPEN PLUS

Process modelling and thermodynamic performance optimization of biomass air gasification fuelled with waste poultry litter pellet by integrating Aspen plus with RSM