Abstract:The recycling of end-of-life automobiles has become one of the most important issues facing various countries. At present, the main approach to processing these automobiles involves recycling, which, after dismantling and crushing, creates residual materials known as automotive shredder residue (ASR). ASR is mainly recycled through incineration or landfill disposal, which can cause environmental pollution and waste of resources. Pyrolysis, an emerging ASR treatment method, is widely considered an ideal alternative. While traditional electric pyrolysis has the advantages of high energy consumption and low heating rate, microwave pyrolysis offers higher heating coefficient, lower energy consumption, and greater environmental protection. Therefore, based on the microwave pyrolysis technology, this work investigates the thermal analysis kinetics and pyrolysis of whole components of ASR. The results revealed that the average activation energy of ASR reached 93.476 kJ/mol, as calculated using the Flynn–Wall–Ozawa (FWO) method, and the reaction model was close to the diffusion-control model. Furthermore, the residence time and heating temperature have a great influence on the product composition and yield and affect the occurrence of secondary reactions, and the microwave power influences the rate of ASR cracking and the rate of energy transfer of the products, in which the microwave power has the greatest influence on the gaseous products. The H 2 content increased from 1.097 to 2.565 wt.%, while the methane content increased from 0.781 to 2.687 wt.%. Moreover, the yield of aromatic hydrocarbons in the liquid product increased with the increase of residence time, and the aromatic hydrocarbon product content increased from 31.67 to 44.39 wt.%. Finally, the increase in heating temperature decreased the yield of aromatic hydrocarbons in liquid products, while the increase of microwave power initially decreased and then increased the yield of aromatic hydrocarbons in liquid products. The findings of this work provide theoretical and experimental references for ASR microwave pyrolysis.

Research on the microwave pyrolysis behavior of automotive shredder residue

Influence of Interactions among Polymeric Components of Automobile Shredder Residue on the Pyrolysis Temperature and Characterization of Pyrolytic Products

Study on the pyrolysis characteristics and char gasification kinetics of pre-separated automobile shredder residues

Feasibility Study on Co-Processing of Automobile Shredder Residue in Coal-Fired Power Plants Via Pyrolysis.

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Pretreatment of Automotive Shredder Residues, Their Chemical Characterisation, and Pyrolysis Kinetics

Py–FTIR–GC/MS Analysis of Volatile Products of Automobile Shredder Residue Pyrolysis

TG–MS Study of the Thermo-Oxidative Behavior of Plastic Automobile Shredder Residues

Studies on Pyrolysis and Gasification of Automobile Shredder Residue in China.

Py-FTIR-GC/MS Analysis of Volatile Products of Automobile Shredder Residue Pyrolysis.

Enhancing pyrolysis of automobile shredder residue through torrefaction: Impact on heavy components formation in oil

Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons As a Process Byproduct

Simulation of Two-stage Automotive Shredder Residue Pyrolysis and Gasification Process Using the Aspen Plus Model

A critical review of developments in the pyrolysis of automotive shredder residue

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Microwave fast pyrolysis of waste tires: Effect of microwave power on product composition and quality

Microwave-assisted Pyrolysis of Solid Waste for Production of High-Value Liquid Oil, Syngas, and Carbon Solids: A Review

A Review on the Microwave-Assisted Pyrolysis of Waste Plastics

Microwave-assisted Fluidized Bed Reactor Pyrolysis of Polypropylene Plastic for Pyrolysis Gas Production Towards a Sustainable Development

Recycling of Automotive Shredder Residue by Solid State Shear Milling Technology

Microwave-assisted pyrolysis of plastics for aviation oil production: energy and economic analyses