Abstract:Inverted perovskite solar cells (PSCs) with PEDOT:PSS as hole transporting layers exhibit tremendous prospects for flexible photovoltaic applications owing to their characteristics of low-temperature solution processability and favorable flexibility. Nevertheless, the energy level mismatch of PEDOT:PSS and perovskite layer results in a severe energy deficit. In addition, the acidity of PEDOT:PSS is detrimental to the stability of devices. To address these issues, we employ a glyceryl monostearate (GMS) interlayer to improve the work function and conductivity of PEDOT:PSS. Meanwhile, it can passivate the traps at the interface of PEDOT:PSS/perovskite. As a consequence, the champion power conversion efficiencies of photovoltaic devices based on MAPbI3 films increase from 14.82% to 17.29% due to the surface modification of PEDOT:PSS with GMS, which is mainly ascribed to the enhanced open-circuit voltage and short-circuit current density. Furthermore, the nonencapsulated MAPbI3 perovskite films and devices based on GMS-modified PEDOT:PSS show much better moisture stability and thermal stability than the counterparts without GMS modification.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03249?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03249</a>.WF of the PEDOT:PSS film via KPFM and UPS measurements; transmission spectra of the PEDOT:PSS film; AFM images of the PEDOT:PSS film without and with GMS treatment; SEM images of the MAPbI3 films; contact angles; fwhm of the XRD diffraction peaks; UV–vis spectra and PL spectra of MAPbI3 films deposited on different substrates; J–V curves of the electron-only and hole-only devices under the dark condition; electron and hole mobility of the perovskite films; photovoltaic parameters; schematic of energy level alignment; integrated JSC obtained from the EQE; stability characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03249/suppl_file/ae0c03249_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) Modified by Water for Efficient Inverted Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Surface Modification of PEDOT:PSS for Enhanced Performance of Inverted Perovskite Solar Cells

Self-woven monolayer polyionic mesh to achieve highly efficient and stable inverted perovskite solar cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Fabrication of ultrathin PEG-modified PEDOT:PSS HTL for high-efficiency Sn-Pb perovskite solar cells by eco-friendly solvent etching technique

Application of arginine-doped PEDOT:PSS as a hole transfer layer in perovskite solar cells

Boosting Performance of Inverted Perovskite Solar Cells by Diluting Hole Transport Layer

An ammonia modified PEDOT: PSS for interfacial engineering in inverted planar perovskite solar cells

Understanding the Mechanism of PEDOT: PSS Modification Via Solvent on the Morphology of Perovskite Films for Efficient Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Improving the Performance of Perovskite Solar Cells with Sodium Stearate-Doped PEDOT:PSS as a Hole Transport Layer

Ion-Exchange Polymer Network Enhanced Interfacial Compatibility for Stable and Efficient Inverted Perovskite Solar Cells

High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”

Bridging the Interfacial Contact for Improved Stability and Efficiency of Inverted Perovskite Solar Cells

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

PEDOT:PSS/CuCl Composite Hole Transporting Layer for Enhancing the Performance of 2D Ruddlesden-Popper Perovskite Solar Cells

Improving Contact and Passivation of Buried Interface for High‐Efficiency and Large‐Area Inverted Perovskite Solar Cells

Tuning the Phase Separation of PEDOT:PSS Affords Efficient Lead-Free Perovskite Solar Cells

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT:PSS Hole Transport Layer