Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Tunable Ferroelectric Properties in (k0.5na0.5)nbo3 Ceramics Fabricated by a Simple Modification of the Conventional Sintering Technique

Effects of Na Excess on the Preparation and Characterization of (K0.5na0.5)nbo3ceramics

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Robust and Tunable Ferroelectricity in Ba/Co Co-Doped (k0.5na0.5)nbo3 Ceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Dielectric Performance and Conductive Mechanism of KNN-based Ceramics Prepared Via Sol–gel Core–shell Process

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Effect of Sintering Conditions on the Electrical Properties of Lead-Free Piezoelectric Potassium Sodium Niobate-Based Ceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Improving densification and electrical properties of KNN-based lead-free piezoceramics via two-step sintering method

The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid

Enhanced Dielectric and Piezoelectric Properties in Litao3-Doped Lead-Free (k,na)nbo3 Ceramics by Optimizing Sintering Temperature

Synergism optimization of ferroelectric phase-transition temperature and piezoelectric properties of KNN-based ceramics by chemical composition regulation

Robust and tunable ferroelectricity in Ba/Co co-doped (K 0.5 Na 0.5 )NbO 3 ceramics

Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties

Feasible Way to Achieve Multifunctional (K, Na)NbO 3 -Based Ceramics: Controlling Long-Range Ferroelectric Ordering

Achieving improved dielectric energy storage properties and temperature stability in 0.91Na0.5Bi0.5TiO3-0.09K0.7La0.1NbO3 based ferroelectric ceramics by composition design and processing optimization

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Microstructures and Electrical Properties of Knbo3 Doped (li,ta,sb) Modified (k,na)nbo3 Lead-Free Ceramics by Two-Step Sintering

Sintering properties of K_(0.5)Na_(0.5)NbO_3 lead-free piezoelectric ceramics