Abstract:To modify the coarse primary Mg2Si phase and improve mechanical properties of Mg2Si reinforced aluminum matrix composites, hypereutectic Al-18Mg(2)Si composites with different Eu contents were fabricated by per-manent mold casting and extrusion followed by heat treatment. Results show that the as-cast Al-18Mg(2)Si composites consisted of primary Mg2Si and eutectic structure (Al + Mg2Si). Eu addition can obviously modify the primary Mg2Si morphology from dendrite to flat truncated octahedron shape, and the average size also decreased from-90 mu m to-16 mu m with increasing Eu content from 0 to 0.1%. But further increasing Eu content would cause over-modification. After T6 treatment, sharp corners of primary Mg2Si were spheroidized and the average size of primary Mg2Si were further decreased. DTA result shows the nucleation temperature of primary Mg2Si increased by Eu addition. Al2Si2Eu phase can act as the heterogeneous nucleation substrate for the primary Mg2Si phase and thus refine the size of primary Mg2Si particle. TEM results show the segregation and/or selective adsorption of Eu on the {100} facets of primary Mg2Si suppress the growth of primary Mg2Si, and thus refine and modify the composites, which proposed to the dominant reason for the refinement and modification of the primary Mg2Si phase. Tensile tests show that the mechanical properties enhanced with increasing Eu content. The elongation and ultimate tensile strength of the T6-treated Al-18Mg(2)Si-0.1Eu composite improved to 5.2% and 241 MPa, which enhanced 225% and 91% compared to the unmodified as-cast Al-18%Mg2Si composite. It is concluded that the morphology transition of primary Mg2Si from dendrite to tetrakaidecahedron and the refinement of primary Mg2Si size with Eu modification, the passivation of the sharp corners in primary Mg2Si particles as well as the appearance of beta" precipitates all contribute to the improvement of the mechanical properties of the T6-treated Al-18Mg(2)Si composites.

Improvement of Microstructure and Mechanical Properties of Near-Eutectic Al-Mg2Si Alloys by Eu Addition

Effects of Eu modification and heat treatment on microstructure and mechanical properties of hypereutectic Al-Mg<sub>2</sub>Si composites

Morphological Modification of Mg2Si Phase and Strengthening Mechanism in Mg2Si/Al Composites by Eu Addition and T6 Heat Treatment

Development of a Near Eutectic Al-Mg2Si-Mg Alloy with High Strength and Toughness

Microstructural refinement and tensile properties enhancement of Al-10Mg2Si cast alloys by copper addition

Modification of Eutectic Si in Al–Si Alloys with Eu Addition

Microstructure refinement and enhanced tensile properties of Al-11Mg2Si alloy modified by erbium

Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys

Effects of Zr,Ti and Sc Additions on the Microstructure and Mechanical Properties of Al-0.4Cu-0.14Si-0.05Mg-0.2Fe Alloys

Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg2Si Alloy

Effect of Al2Ca Addition and Heat Treatment on the Microstructure Modification and Tensile Properties of Hypo-Eutectic Al–Mg–Si Alloys

Influence of the Mg Content on the Microstructure and Mechanical Properties of Al-xMg-2.0Si-0.6Mn Alloy

The Effect of Si Content on the Microstructure and Mechanical Properties of Al–1.2Mg–xSi–1.2Cu–0.6Mn Cast Alloy

Investigation on Microstructures and Mechanical Properties of the Hypoeutectic Al-10Si-0.8Fe- X Er Alloy

Effect of Rare Earth Elements Erbium and Europium Addition on Microstructure and Mechanical Properties of A356 (Al–7Si–0.3Mg) Alloy

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

Influences of Mg content on the microstructures and mechanical properties of cast Al–2Li–2Cu–0.2Zr alloy

Microstructure Refinement and Mechanical Properties of Eutectic Mg2Si Reinforced Mg Matrix Composites Containing Sr Element