Abstract:The emergence of all-solid-state Li batteries (ASSLBs) represents a promising avenue to address critical concerns like safety and energy density limitations inherent in current Li-ion batteries. Solid electrolytes (SEs) show significant potential in curtailing Li dendrite intrusion, acting as natural barriers against short circuits. However, the substantial challenges at the SEs−electrode interface, particularly concerning the anode, pose significant impediments to the practical implementation of ASSLBs. This review aims to delineate the most viable strategies for overcoming anode interfacial hurdles across four distinct categories of SEs: sulfide SEs, oxide SEs, polymer SEs, and halide SEs. Initially, pivotal issues such as anode interfacial side reactions, inadequate physical contact, and Li dendrite formation are comprehensively outlined. Furthermore, effective methodologies aimed at enhancing anode interfacial stability are expounded, encompassing approaches like solid electrolyte interface (SEI) interlayer insertion, SE optimization, and the adoption of Li alloy in lieu of Li metal, each tailored to specific SE categories. Moreover, this review presents novel insights into fostering interfaces between diverse SE types and Li anodes, while also advocating perspectives and recommendations for the future advancement of ASSLBs. Graphical Abstract

An oxygen-blocking oriented multifunctional solid-electrolyte interphase as a protective layer for a lithium metal anode in lithium-oxygen batteries (vol 14, pg 1439, 2021)

Correction: An oxygen-blocking oriented multifunctional solid–electrolyte interphase as a protective layer for a lithium metal anode in lithium–oxygen batteries

Erratum: An oxygen-blocking oriented multifunctional solid-electrolyte interphase as a protective layer for a lithium metal anode in lithium-oxygen batteries (Energy Environ. Sci., (2021) 14 (1439–1448) DOI: 10.1039/D0EE02931A)

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition (vol 15, Pg 7949, 2024)

Understanding the lithiation mechanism of Li<sub>2</sub>O-doped spinel high-entropy oxides as anode materials for Li-ion batteries ( vol 2 , pg 1685 , 2023)

Correction: Enhanced structural stability and overall conductivity of Li-rich layered oxide materials achieved by a dual electron/lithium-conducting coating strategy for high-performance lithium-ion batteries

Correction: Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

A robust interphase via in-situ pre-reconfiguring lithium anode surface for long-term lithium-oxygen batteries

Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Regulation of Interphase Layer by Flexible Quasi‐Solid Block Polymer Electrolyte to Achieve Highly Stable Lithium Metal Batteries (Adv. Funct. Mater. 27/2023)

Designing a Self-Healing Protective Film on a Lithium Metal Anode for Long-Cycle-life Lithium-Oxygen Batteries

Solid Electrolyte Interphase Structure Regulated by Functional Electrolyte Additive for Enhancing Li Metal Anode Performance

Design of a Teflon‐Like Anion for Unprecedently Enhanced Lithium Metal Polymer Batteries (Adv. Energy Mater. 15/2023)

Recent Advances in Oxygen Redox Activity of Lithium‐Rich Manganese‐Based Layered Oxides Cathode Materials: Mechanism, Challenges and Strategies (Adv. Energy Mater. 40/2024)

Artificial Protection Film on Lithium Metal Anode Toward Long‐Cycle‐Life Lithium–Oxygen Batteries

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Publisher Correction: Li–Solid Electrolyte Interfaces/Interphases in All-Solid-State Li Batteries

Interfacial Engineering at Cathode/LATP Interface for High-Performance Solid-State Batteries

Lithium Fluoride in Electrolyte for Stable and Safe Lithium‐Metal Batteries (Adv. Mater. 42/2021)

Surface Engineering Donor and Acceptor Sites with Enhanced Charge Transport for Low-Overpotential Lithium–oxygen Batteries