Abstract:While much research has been developed to achieve very large mode areas (LMA) fibers, many difficulties arise, such as bending losses, mode deformation, and high order modes suppression. The main obstacle which remains difficult to confront in LMA fibers is bending distortion. When a conventional LMA fiber is coiled, it will generally suffer large bending distortion, and the mode area will contract accordingly, which would significantly affect laser or amplifier performances for some LMA fibers. In this report, we proposed a simple and efficient way for bending compensation in LMA fiber. A periodically etching structure is proposed to compensate the deformation, bending loss, and modecoupling effects in large mode area fibers. The numerical simulation results showed that the design not only efficiently improves the effective area, but also the fundamental mode bending loss is resistant. Without the structure, the bending losses are very low at large bending radius. When the bending radius reduces, there is a rapid increase of losses. In particular, for smaller bending radius (less than 20 cm), the fundamental mode deforms severely, and cannot normally transmit in the core. The numerical simulation results showed that the design not only efficiently improves the effective mode area, but also the fundamental mode bending loss is resistant. Even at bending radius as small as 5cm, the fundamental mode can transmit normally in the fiber with an increased mode area scaling. Furthermore, the LMA fiber with the structure can be flexibly manufactured by conventional fiber manufacturing approaches and recent etching t echnologies.

Design and Analysis of a Multi-Layer Core, Hole-Assisted Bend-Resistant Large Mode Area Fiber for 2 Μm Operation

Design and Analysis of Trench-Assisted Low-Bending-Loss Large-Mode-Field-Area Multi-Core Fiber with an Air Hole

Study on Dual-Mode Large-Mode-area Multi-Core Fiber with Air-Hole

Design of a large-mode-area pixeled leakage channel fiber with an ultrahigh loss ratio for 2 µm operation

Fourteen-core Dual-Mode Fiber with Low Bending Loss and Large Mode Area

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

A Novel Three-Ring-core Few-Mode Fiber with Large Effective Area and Low Nonlinear Coefficient

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Single-mode large-mode-area double-ring hollow-core anti-resonant fiber for high power delivery in mid-infrared region

Multi-trench fiber with four gaps for improved bend performance

All-solid bend-resistant large mode area fiber design with highly doped rods in the cladding

Large Mode Area Single Mode Fiber with a Twisted Polygon-Shaped Core

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Design of ring-core few-mode multi-core fiber with low crosstalk and low bending loss

Efficient Bending Compensation of Large Mode Area Fiber

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Ultralow bending-loss micro-structured fiber with large-mode-area

Large-mode-area Multi-Resonant All-Solid Photonic Bandgap Fiber with Bending Induced High-Order-modes Leakage

A weakly-coupled air-hole-bow-tie-assisted few-mode fiber for short-haul MDM across C + L band