Abstract:This study focuses on the improvement of the efficiency of an absorption heat pump for high heating temperatures with ammonia-water as working pair, based on experimental investigations. For this purpose, the absorber and the solution heat exchanger are designed. Furthermore, a new generator assembly, consisting of a plate heat exchanger (PHX), a storage tank and a separator, is implemented in the absorption heat pump. In comparison to a vessel-type generator, the weight of the residential size absorption heat pump with a total heating power of about <math>20kW</math> in OP1 was decreased from <math>300kg</math> to <math>180kg</math>. The ammonia filling quantity was also reduced from <math>15kg</math> by at least <math>9.5kg</math> compared to a vessel-type generator. Experimental investigations are carried out at different operating points where each operating point represents a specific loading condition in the building heating system. An efficiency up to <math>COPh=1.42</math> is achieved. Even at challenging conditions like a low external evaporator inlet temperature of <math>-10°C</math> or a high external condensator outlet temperature of <math>63°C</math>, a <math>COPh</math> of <math>1.10</math> and <math>1.05</math> respectively is reached. The solution heat exchanger is working excellently with an efficiency of <math>0.972<ηSHX<0.996</math>. Furthermore, improvements like an integration of a condensate separator or an absorber with internal heat recovery are presented.

Thermodynamic Analysis of an Ammonia-Water Solution Cross-Type Absorption-Resorption Heat Pump System

Performance research of a solution cross-type absorption-resorption heat transformer using NH3/H2O work fluid

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Experimental Performance Analysis of an Improved Multifunctional Heat Pump System

Design and analysis of an ammonia-water absorption heat pump

Experimental Investigation on NH3–H2O Compression-Assisted Absorption Heat Pump (CAHP) for Low Temperature Heating under Lower Driving Sources

Low-temperature ammonia absorption refrigeration system based on the temperature difference uniformity principle: Optimization analysis

Nh3-H2o Water Source Absorption Heat Pump (wsahp) for Low Temperature Heating: Experimental Investigation on the Off-Design Performance

Simulation Study on Performance of an Air Source Heat Pump System Combined with Phase Change Thermal Storage Using Alternative Refrigerants

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Low Evaporation Temperature Absorption Heat Pump

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Performance Comparisons of NH3/ionic Liquid Absorption–compression Heat Pump for Increasing the Utilization of Geothermal Energy

Performance Improvement of Ammonia/Absorbent Air Source Absorption Heat Pump in Cold Regions

Experimental Investigation on NH 3 –H 2 O Compression-Assisted Absorption Heat Pump (CAHP) for Low Temperature Heating in Colder Conditions

Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis

General thermodynamic performance of irreversible absorption heat pump

Ammonia-based hybrid chemisorption-compression heat pump for high-temperature heating

A thermodynamic analysis of an auto-cascade heat pump cycle for heating application in cold regions