Abstract:Air source absorption heat pump is promising in energy saving and emission reduction of heating and domestic hot water, but performs badly or even cannot work in cold climate. The ammonia/absorbent air source absorption heat pump with low-pressure boosting is proposed to solve the problem. The hybrid air source absorption heat pump + compressor system is modeled and the compression ratio is optimized to obtain maximum primary energy efficiency. The integrated system is simulated with air temperature ranging from −30℃ to 10℃ and hot water temperature from 30℃ to 60℃. Comparative simulations on three working fluids reveal that NH3–LiNO3 system has the lowest compression ratio and the highest primary energy efficiency value. By pressure boosting, the air source absorption heat pump can operate under air temperatures as low as −30℃. Primary energy efficiency of the hybrid system is about 15–50% higher than that of coal boiler, showing great potential for heat supply in cold regions. Practical application: Heating and domestic hot water consumes a large amount of energy every year. Air source absorption heat pump can be a potential alternative to the traditional boiler systems in the point view of primary energy efficiency. However, air source absorption heat pump performs badly or cannot work when the air temperature is low. This paper presents a hybrid air source absorption heat pump with pressure boosting to improve the performance of the air source absorption heat pump heating system, making it operate under lower outdoor air temperatures with higher primary energy efficiency. The novel heat supply system is expected to make contributions to building energy saving as well as pollution reduction.

Performance Comparisons of NH3/ionic Liquid Absorption–compression Heat Pump for Increasing the Utilization of Geothermal Energy

Performance Investigation On Nh3/Ionic Liquid Absorption Cycles For Geothermal Energy Utilization

Compression-assisted Absorption Cycles Using Ammonia and Various Ionic Liquids for Cleaner Heating

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Comparisons of different working pairs and cycles on the performance of absorption heat pump for heating and domestic hot water in cold regions

Ionic liquid screening and performance optimization of transcritical carbon dioxide absorption heat pump enhanced by expander

Performance Comparison of Absorption Heating Cycles Using Various Low-Gwp and Natural Refrigerants

Performance Comparison and Energy Saving Ratio analysis Between Absorption Heat Pump and Gas Engine-driven Heat Pump

Experimental Performance Analysis of an Improved Multifunctional Heat Pump System

Experimental Investigation on NH 3 –H 2 O Compression-Assisted Absorption Heat Pump (CAHP) for Low Temperature Heating in Colder Conditions

Experimental Investigation on NH3–H2O Compression-Assisted Absorption Heat Pump (CAHP) for Low Temperature Heating under Lower Driving Sources

Isopropanol-Acetone-Hydrogen chemical heat pumps for improved heat recovery from geothermal resources, A case study in China

Ionic liquids for microchannel membrane-based absorption heat pumps: Performance comparison and geometry optimization

Performance Improvement of Ammonia/Absorbent Air Source Absorption Heat Pump in Cold Regions

Investigations on the Cycle Performance of a Diffusion Absorption Heat Transformer Using HCOOK As an Alternative to LiBr

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Simulation Study on Performance of an Air Source Heat Pump System Combined with Phase Change Thermal Storage Using Alternative Refrigerants

Study on the heating performance of absorption-compression hybrid heat pump in severe cold regions

Low Evaporation Temperature Absorption Heat Pump

A competitive study of a geothermal heat pump equiped with an intermediate economizer for R134a and R513A working fluids

Performance Improvement of Absorption Heat Pump