Abstract:This study focuses on the improvement of the efficiency of an absorption heat pump for high heating temperatures with ammonia-water as working pair, based on experimental investigations. For this purpose, the absorber and the solution heat exchanger are designed. Furthermore, a new generator assembly, consisting of a plate heat exchanger (PHX), a storage tank and a separator, is implemented in the absorption heat pump. In comparison to a vessel-type generator, the weight of the residential size absorption heat pump with a total heating power of about <math>20kW</math> in OP1 was decreased from <math>300kg</math> to <math>180kg</math>. The ammonia filling quantity was also reduced from <math>15kg</math> by at least <math>9.5kg</math> compared to a vessel-type generator. Experimental investigations are carried out at different operating points where each operating point represents a specific loading condition in the building heating system. An efficiency up to <math>COPh=1.42</math> is achieved. Even at challenging conditions like a low external evaporator inlet temperature of <math>-10°C</math> or a high external condensator outlet temperature of <math>63°C</math>, a <math>COPh</math> of <math>1.10</math> and <math>1.05</math> respectively is reached. The solution heat exchanger is working excellently with an efficiency of <math>0.972<ηSHX<0.996</math>. Furthermore, improvements like an integration of a condensate separator or an absorber with internal heat recovery are presented.

Compression-assisted Absorption Cycles Using Ammonia and Various Ionic Liquids for Cleaner Heating

Analysis on Innovative Resorption Cycle for Power and Refrigeration Cogeneration

Performance Comparison of Absorption Heating Cycles Using Various Low-Gwp and Natural Refrigerants

Performance Comparisons of NH3/ionic Liquid Absorption–compression Heat Pump for Increasing the Utilization of Geothermal Energy

Thermodynamic simulation of an absorption heat pump-transformer-power cycle operating with the ammonia-water mixture

Performance Improvement of Ammonia/Absorbent Air Source Absorption Heat Pump in Cold Regions

Comparative Study on Two Low-Grade Heat Driven Absorption-Compression Refrigeration Cycles Based on Energy, Exergy, Economic and Environmental (4E) Analyses

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Ionic liquid screening and performance optimization of transcritical carbon dioxide absorption heat pump enhanced by expander

Heat Integration of Ammonia-Water Absorption Refrigeration System Through Heat-Exchanger Network Analysis

Performance Improvement of Absorption Heat Pump

A SIMPLIFIED AMMONIA WATER ABSORPTION CYCLE WITHOUT DISTILLATION COLUMN IN SMALL TEMPERATURE LIFT APPLICATIONS

An Improved Cycle for Large Temperature Lifts Application in Water-Ammonia Absorption System

Performance Investigation On Nh3/Ionic Liquid Absorption Cycles For Geothermal Energy Utilization

Thermodynamical Analysis of the Distillation Column for Targeting Minimum Energy in Ammonia–Water Absorption Refrigeration Cycle

Gas-fired absorption heat pump applied for high-temperature water heating: Parametric study and economic analysis

An Efficient Ammonia-Water Power Cycle in Low Temperature Waste Heat Application

Design and analysis of an ammonia-water absorption heat pump

An Overview of Ammonia-Based Absorption Chillers and Heat Pumps

Research on Combined Power and Cooling System Using Ammonia-Water Mixtures

A Novel Technique for Improving the Performance of Ammonia Absorption Refrigeration Cycle