Experimental investigations of an absorption heat pump prototype with intermediate process for residential district heating
Ding Lu,Yin Bai,Yanxing Zhao,Xueqiang Dong,Maoqiong Gong,Ercang Luo,Gaofei Chen,Qingyu Xu,Jun Shen
DOI: https://doi.org/10.1016/j.enconman.2019.112323
IF: 10.4
2020-01-01
Energy Conversion and Management
Abstract:Despite being efficient means of district heating, conventional single-effect absorption heat pumps suffer significant performance deterioration at low ambient temperatures. To solve this problem, an ammonia-water absorption heat pump prototype with intermediate process is designed and built. It utilizes both low-grade heat from the ambient and exhaust heat from natural gas combustion, through the evaporator and intermediate evaporator, respectively. To perform comparison study, the prototype also has the single-effect mode. Experimental results indicate that when the evaporation temperature is 0 degrees C, the prototype with intermediate process can provide 30 kW heating capacity to heat the water in sequence through the rectifier, condenser and absorber, from 34.24 to 55.09 degrees C, and the coefficient of performance and primary energy efficiency are 1.66 and 1.28, respectively. When evaporation temperatures reduce to - 5, - 10 and -15 degrees C, the coefficient of performances are 1.51, 1.40 and 1.28, respectively, reaching 77%-90% of the simulation values under corresponding working conditions. Compared to the conventional single-effect system, the prototype with intermediate process performs better at lower evaporation temperature, with the coefficient of performance improved by 11%. By replacing the original heat exchangers, the proposed system can be easily applied to the existing heat networks based on gas-fired boilers to improve energy efficiency, and the favorable experimental performance proves that it is a more efficient way of residential district heating, especially in cold regions.