Abstract:Nickel, a valued metal, mainly exists as nickel oxide in laterite nickel ore. Furthermore, a large part of the laterite nickel ore is low-grade saprolitic ore. In this paper, a research on preparing ferro-nickel alloy from low-grade saprolitic laterite nickel ore using metallized reduction-magnetic separation was studied. In the research, the carbothermic reductions of iron oxide and nickel oxide were analyzed in terms of thermodynamics. The influences of reduction temperature, reduction time, carbon ratio, and CaO addition on the recoveries and grades of iron and nickel were experimentally investigated. To analyze and clarify the related mechanism, the microstructure of ferro-nickel alloy was observed by optical microscope (OM) and scanning electron microscope/energy dispersive spectrometer (SEM/EDS). Accordingly, the results showed that, increasing reduction temperature can improve the grades and recoveries of nickel and iron; appropriate reduction time, carbon ratio and CaO addition can favor aggregation and growing up of the ferro-nickel particles, improving the grades and recoveries of nickel and iron. The optimal process parameters obtained were a reduction temperature of 1350 °C, reduction time of 2 h, carbon ratio of 1.2, and CaO addition of 10%. In this case, the ferro-nickel alloy with nickel grade 7.90% and iron grade 77.32% was prepared successfully from the low-grade saprolitic ore with nickel content 1.82%. The nickel and iron recoveries were 89.36% and 95.87% respectively, which achieved the highly efficient recovery and utilization of iron and nickel of low-grade laterite nickel ore.

One-step and Selective Extraction of Nickel from Nickel-Based Superalloy by Molten Zinc

Dealloying Superalloy by Liquid Mg for the Selective Extraction of Ni

Comprehensive Recovery of Copper-Nickel Alloy Scrap

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Microstructural evolution of a nickel-based single-crystal superalloy embrittled by molten Zn

Preparing Ferro-Nickel Alloy from Low-Grade Laterite Nickel Ore Based on Metallized Reduction–Magnetic Separation

Insight into Selective Removal of Copper from High-Concentration Nickel Solutions with XPS and DFT:New Technique to Prepare 5N-Nickel with Chelating Resin

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

Extraction, phase transformation and kinetics of valuable metals from nickel-chromium mixed metal oxidized ore

Iodination volatilization roasting of ferronickel alloys for selectively volatilizing iron and simultaneously obtaining nickel containing powder

Extraction of Nickel from Garnierite Laterite Ore Using Roasting and Magnetic Separation with Calcium Chloride and Iron Concentrate

Stepwise separation and recovery of molybdenum, vanadium, and nickel from spent hydrogenation catalyst

Extraction of valuable metals from low-grade nickel matte by FeCl3·6H2O roasting and water leaching process with studies on phase evolution and kinetics analysis of chlorination process

Extraction of ferronickel concentrate from laterite nickel ore by reduction roasting-magnetic separation using spent cathode carbon

Solvent extraction of Ni and Co from Ni-laterite leach solutions using a new synergistic system consisting of Versatic 10 acid, Mextral 6103H and Aliquat 336 with elemental mass balance for leaching, precipitation, solvent extraction, scrubbing and stripping

Recovery of Cu and Ni in Electroplating Sludge by a Low-Temperature Alkaline Smelting Technique

Extraction of Cu and Ni from Low-Ni Matte by a Combined Chemical Precipitation and Molten Salt Electrolysis Approach

Magnetic separation of nickel-plating waste liquid using a high temperature superconducting bulk magnet

Selective leaching of nickel and cobalt from sintered nickel alloy by oxygen pressure acid leaching process

On the segregation behavior and influences of minor alloying element Zr in nickel-based superalloys

Direct Extraction of Nickel and Copper from Low-Grade Nickel Sulfide Ore by Chlorination Roasting with Mixed MgCl2·6H2O and NaCl