Abstract:The pretreatment atmosphere has a significant impact on the performance of iron-based catalysts in carbon dioxide (CO2) hydrogenation. In this study, we investigated the effects of carbon monoxide (CO), syngas (H2/CO), and hydrogen (H2) on the performance of iron-based catalysts during the pretreatment process. To evaluate the structural changes in catalysts after activation and reaction, we analyzed their morphology and particle size, the surface and bulk phase composition, carbon deposition, the desorption of linear α-olefins and reaction intermediates using transmission electron microscope (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Mössbauer spectroscopy (MES), temperature-programmed desorption (TPD), and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). Raman and XPS showed that the H2 pretreatment catalyst caused the absence of iron carbides due to the lack of carbon source, and the CO and syngas pretreatment catalysts promoted the formation of carbon deposits and iron carbides. While the bulk phase of the CO and syngas pretreatment catalyst mainly consists of iron carbide (FeCx), XRD and MES revealed that the bulk phase of the H2 pretreatment catalyst primarily consisted of metallic iron (Fe) and iron oxide (FeOx). The composition of the phase is closely associated with its performance at the initial stage of the reaction. The formation of olefins and C5+ products is more encouraged by CO pretreatment catalysts than by H2 and syngas pretreatment catalysts, according to in situ DRIFTS evidence. Ethylene (C2H4)/propylene (C3H6)-TPD indicates that the CO pretreatment catalyst is more favorable for the desorption of olefins which improves the olefins selectivity. Based on the analysis of the TEM images, H2 pretreatment stimulated particle agglomeration and sintering. In conclusion, the results show that the CO-pretreatment catalyst has higher activity due to the inclusion of more FeOX and Fe3C. In particular, the presence of Fe3C was found to be more favorable for the formation of olefins and C5+ hydrocarbons. Furthermore, carbon deposition was relatively mild and more conducive to maintaining the balance of FeOx/FeCx on the catalyst surface.

Selective Hydrogenation of CO2 to Hydrocarbons: Effects of Fe3O4 Particle Size on Reduction, Carburization, and Catalytic Performance

Structure sensitivity of iron oxide catalyst for CO2 hydrogenation

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

An Introductive Study about CO 2 Hydrogenation into Hydrocarbons Using Iron Catalysts

Mechanistic Insight into Hydrocarbon Synthesis via CO2 Hydrogenation on χ-Fe5C2 Catalysts

Effects of Different Reductive Agents on Zn-Promoted Iron Oxide Phases in the CO2–Fischer–Tropsch to Linear α-Olefins

Enhancing CO 2 hydrogenation performance via the synergistic effects of iron carbides and iron oxides

Selectivity control between reverse water-gas shift and fischer-tropsch synthesis in carbon-supported iron-based catalysts for CO 2 hydrogenation

Selective synthesis of olefins via CO 2 hydrogenation over transition-metal-doped iron-based catalysts

Effect of reduction and carburization pretreatment on iron catalyst for synthesis of light olefins from CO hydrogenation

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Effect of In2O3 particle size on CO2 hydrogenation to lower olefins over bifunctional catalysts

CO2 Hydrogenation on Carbides Formed in situ on Carbon-Supported Iron-Based Catalysts in High-Density Supercritical Medium

Dynamic structural evolution of iron catalysts involving competitive oxidation and carburization during CO 2 hydrogenation

Carbon Monoxide Hydrogenation on Fe 2 O 3 /zro 2 Catalysts

CO 2 hydrogenation to olefins on supported iron catalysts: Effects of support properties on carbon-containing species and product distribution

Facet-Controlled Cu-doped and K-promoted Fe2O3 nanosheets for efficient CO2 hydrogenation to liquid hydrocarbons

The Effect of Fe2O3 Crystal Phases on CO2 Hydrogenation

Surface Coordinate Geometry of Iron Catalysts: Hydrogenation of CO2 over Fe/TiO2 Prepared by a Novel Method

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines