Effect of Nd Addition on the Microstructure, Mechanical Properties, Shape Memory Effect and Corrosion Behaviour of Cu–Al–Ni High-Temperature Shape Memory Alloys

Xin Zhang,Tianyu Cui,Qingsuo Liu,Zhizhong Dong,Cheng Man

DOI: https://doi.org/10.1016/j.jallcom.2020.157685

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:The effects of rare earth element Nd on the microstructure, mechanical, shape memory properties and corrosion behaviour of Cu-13.0Al-4.0Ni-xNd (wt.%) high-temperature shape memory alloys were investigated in this paper. It was observed that the grains in Cu-13.0Al-4.0Ni-xNd alloys can be refined by adding Nd, and the grain size decreased from the millimeter scale to several hundred microns. The matrix of the Cu-13.0Al-4.0Ni-xNd alloys, composed of 18R and 2H martensite, was not changed by Nd doping. However, the hexagonal (Al,Ni)Cu4Nd phase was formed as the Nd content increased. The grain refinement led to an improvement in the mechanical properties of the Cu-13.0Al-4.0Ni-xNd alloys. When x = 0.5, the compressive fracture stress and strain increased from 580 MPa to 10.5% to 940 MPa and 18.3%, respectively. The Nd addition also enhanced the shape memory effect of the Cu-13.0Al-4.0Ni-xNd alloys, and a reversible strain of 6.8% was obtained for x = 0.2 under a prestrain of 10% after heating. In addition, the results of electrochemical impedance measurement and polarization measurement showed that the corrosion resistance of Cu-Al-Ni alloy were slightly reduced by Nd addition, and the corrosion behaviour of Cu-Al-Ni alloy was mainly controlled by Cu element. (C) 2020 Elsevier B.V. All rights reserved.