Abstract:Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) have attracted great attention for more than two decades, due to their large magnetic shape memory effect that originates from the rearrangement of martensitic variants under an external magnetic field. Over the past decade, accumulated knowledge on the properties of Ni-Mn-Ga Heusler alloys has allowed people to foresee the possibility of employing these alloys in device applications. However, the low operating temperatures and high brittleness remain the major drawbacks for the industrial application. Consequently, there has been growing interest in the modification of Ni-Mn-Ga alloys by adding a fourth element to increase transformation temperatures and to improve ductility. A recent study shows that the ductility has been effectively improved in Cu-doped Ni-Mn-Ga alloy under the situation of single phase via strengthening grain boundaries. In addition, the crystal structure, martensitic transformation, magnetic properties, high temperature magnetoplasticity and magnetocaloric effect have been reported in Ni-Mn-Ga-Cu alloys. Experimental results have shown that the martensitic transformation temperature (T-m) is drastically increased and the Curie temperature (T-c) slightly decreased with Cu addition. As already known, the alloying elements affect both the crystal and electronic structures and hence the stability of austenite and martensite phases. Therefore, knowledge of the effects of Cu addition is of great importance to understand the composition dependence of T-m and T-c. First-principles calculation results on Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) ferromagnetic shape memory alloys of this research draw following conclusions. The added Cu atom preferentially occupies the Mn site. The formation energy results indicate that ferromagnetic austenite is more stable than the paramagnetic one. The ferromagnetic state becomes instable and paramagnetic state becomes more stable when Mn is gradual substituted by Cu. The evaluated T-c decreases with increasing Cu content that is derived from the decrease of total energy difference between the paramagnetic and the ferromagnetic austenite. The experimentally observed decrease of T-m is originated from the decrease of total energy difference between the austenite and the non-modulated martensite. The difference between the up and down DOS is reduced with the increasing Cu content that gives rise to the decrease of the total magnetic moments. The purpose of this work is to explore the influence of Cu addition on crystal structure, T-m, T-c and electronic structures of Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) alloys by first-principles calculations, aiming at providing theoretical data and directions for developing high performance FSMAs.

Investigation of thermal, crystal and magnetic behavior of addition of Nd rare earth element effect on CuAlMn shape memory alloy

Influence of Cu and Gd on Thermal Stability and Magnetic Properties of Nd(DyAl)FeB Magnets

Effect of Alloying Element Al Substitution on Ni-Mn-Sn Shape Memory Alloy by First-Principle Calculations

Effect of alloying elements (Nb, Ag) on the damping performance of Cu–Al–Mn shape memory alloys

Ductility and shape memory effect of a NiAl alloy containing Nd

A First-Principles Study on Crystal Structure, Phase Stability and Magnetic Properties of Ni-Mn-Ga-Cu Ferromagnetic Shape Memory Alloys

Influence of microstructure on elastocaloric and shape memory effects in Mn50Ni32Sn7Co11 alloys

Elastocaloric Effect and Magnetic Properties of Cu–Al–Mn Shape Memory Alloy

Martensitic transformation and magnetocaloric effect in Mn-Ni-Nb-Sn shape memory alloys: The effect of 4d transition-metal doping

Mechanical and Magnetic Properties of Ni-Mn-Ga-Gd Ferromagnetic Shape Memory Alloys

Mechanical and Thermal Behavior of Cu84−xAl13Ni3Hfx Shape Memory Alloys

Influence of copper addition on the properties of equiatomic NiTi shape memory alloy prepared by vacuum induction melting method

Designing a New Ni-Mn-Sn Ferromagnetic Shape Memory Alloy with Excellent Performance by Cu Addition

Effect Of Nd Addition On The Microstructure And Martensitic Transformation Of Ni-Ti Shape Memory Alloys

Microstructure Characterization, Structure and Magnetic Properties of Ni–Mn–Sn Shape Memory Alloys

Effect of rare earth Nd on the microstructural transformation and mechanical properties of 7xxx series aluminum alloys

A Study of a Cryogenic CuAlMn Shape Memory Alloy

Effect of Substituting Nd for Y on Microstructure and Mechanical Properties of Mg-7Y-2Al Alloy

Tuning of the magneto-caloric effects in Ni43Mn46In11magnetic shape memory alloys by substitution of boron

Effect of Rare Earth Dy Addition on Microstructure and Martensitic Transformation of Polycrystalline Ni50Mn29Ga21−xDyx Ferromagnetic Shape Memory Alloys

Effects of Nd on Microstructure and Mechanical Properties of Cast Al-Si-Cu-Ni-Mg Piston Alloys