Abstract:<p>Quantitative characterization of subsurface defects is a challenging problem in eddy current testing (ECT), not only due to the limitation of the penetration depth of eddy currents, but also due to the ill-posed nature of the inverse problem associated with quantifying a defect's 3D dimensions and its location in the test sample from measurements made on the sample surface. This paper presents a new ECT method for subsurface defect detection and quantification. Eddy currents with continuously varying frequency in a selected frequency band is induced in the conductive sample by using a chirp modulated excitation scheme. The frequency band of the chirp waveform is chosen so that the penetration depth of eddy current in the selected frequency band covers the thickness of the sample under test. The presence of a defect will disturb the distribution of the induced eddy currents. This disturbance is measured in terms of a varying magnetic field using an array of tunneling magneto-resistance (TMR) sensors. A C-scan image is obtained by linearly scanning the specimen. The footprint of the defect is calculated using spatial features of the C-scan image while the depth of the defect is estimated by analyzing the frequency characteristics of the measured chirp signal. A three-dimensional estimate of the dimensions of any subsurface defect can be obtained using the empirical procedure. The operating principle of this method is studied with a finite element method (FEM) model and then validated experimentally with a prototype array probe consisting of 180 TMR sensors. Thanks to its high sensitivity, the TMR sensors are suitable for measuring the weak low frequency magnetic field signal caused by a deep defect. The spacing between each two adjacent sensors is as small as 0.5 mm providing a magnetic field image with fine spatial resolution, which is beneficial for defect quantification. An aluminum sample with embedded defects was tested using the prototype probe. It is seen that the proposed scheme utilizing spatial and frequency domain features is capable of quantitatively characterizing subsurface defects.</p>

Complexed Shape Micro Defects Inspection By High Sensitivity Flexible TRT Eddy Current Array

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

A Novel Self-Compensating GMR-Based Eddy Current Probe for Hidden Crack Detection

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Imaging and quantitative detection of complex defects with a flexible electromagnetic array sensor

Eddy Current Probe With Three-Phase Excitation and Integrated Array Tunnel Magnetoresistance Sensors

High-resolution Magnetic Imaging Probe with Staggered Sensor Arrays for Small Defects Inspection

Vector Magnetic Field Imaging With High-Resolution TMR Sensor Arrays for Metal Structure Inspection

Inspection of defects in conductive multi-layered structures by an eddy current scanning technique: Simulation and experiments

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Deep Defects Evaluation of Conductive Materials Based on Eddy Current Nondestructive Testing with GMR sensor

Frequency domain analysis of magnetic field images obtained using TMR array sensors for subsurface defect detection and quantification

High resolution magnetic field imaging probe with two rows of TMR sensors for small defects inspection

Flexible Probe With Array Tunneling Magnetoresistance Sensors for Curved Structure Inspection

Physical coupling fusion sensing of MFL-EMAT for synchronous surface and internal defects inspection

A Differential Excitation Eddy Current Probe Based on Novel Annular Fractal Curve for Defects Inspection

Study on Remote Field Eddy Current Testing Technology for Crack-like Defects in Long Truss Structure of Aircraft

Composite Sensor of EMAT and ECT Using a Shareable Receiver Coil for Detecting Surface and Bottom Defects on the Steel Plate

Flexible Array Probe With In-Plane Differential Multichannels for Inspection of Microdefects on Curved Surface

Research on key technology of eddy current testing system based on GMR transducer