Abstract:Inverted perovskite solar cells (PSCs) with PEDOT:PSS as hole transporting layers exhibit tremendous prospects for flexible photovoltaic applications owing to their characteristics of low-temperature solution processability and favorable flexibility. Nevertheless, the energy level mismatch of PEDOT:PSS and perovskite layer results in a severe energy deficit. In addition, the acidity of PEDOT:PSS is detrimental to the stability of devices. To address these issues, we employ a glyceryl monostearate (GMS) interlayer to improve the work function and conductivity of PEDOT:PSS. Meanwhile, it can passivate the traps at the interface of PEDOT:PSS/perovskite. As a consequence, the champion power conversion efficiencies of photovoltaic devices based on MAPbI3 films increase from 14.82% to 17.29% due to the surface modification of PEDOT:PSS with GMS, which is mainly ascribed to the enhanced open-circuit voltage and short-circuit current density. Furthermore, the nonencapsulated MAPbI3 perovskite films and devices based on GMS-modified PEDOT:PSS show much better moisture stability and thermal stability than the counterparts without GMS modification.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03249?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03249</a>.WF of the PEDOT:PSS film via KPFM and UPS measurements; transmission spectra of the PEDOT:PSS film; AFM images of the PEDOT:PSS film without and with GMS treatment; SEM images of the MAPbI3 films; contact angles; fwhm of the XRD diffraction peaks; UV–vis spectra and PL spectra of MAPbI3 films deposited on different substrates; J–V curves of the electron-only and hole-only devices under the dark condition; electron and hole mobility of the perovskite films; photovoltaic parameters; schematic of energy level alignment; integrated JSC obtained from the EQE; stability characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03249/suppl_file/ae0c03249_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sodium Benzenesulfonate Modified Poly (3,4‐ethylenedioxythiophene):Polystyrene Sulfonate with Improved Wettability and Work Function for Efficient and Stable Perovskite Solar Cells

Surface Modification of PEDOT:PSS for Enhanced Performance of Inverted Perovskite Solar Cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

Improving the Performance of Perovskite Solar Cells with Sodium Stearate-Doped PEDOT:PSS as a Hole Transport Layer

Understanding the Mechanism of PEDOT: PSS Modification Via Solvent on the Morphology of Perovskite Films for Efficient Solar Cells

Energy Level Tuning in CsPbBr3 Perovskite Solar Cells through In Situ-Polymerized PEDOT Hole Transport Layer

Tailored PEDOT:PSS hole transport layer for higher performance in perovskite solar cells: Enhancement of electrical and optical properties with improved morphology

An ammonia modified PEDOT: PSS for interfacial engineering in inverted planar perovskite solar cells

Fabrication of ultrathin PEG-modified PEDOT:PSS HTL for high-efficiency Sn-Pb perovskite solar cells by eco-friendly solvent etching technique

Passivation of Sodium Benzenesulfonate at the Buried Interface of a High-Performance Wide-Bandgap Perovskite Solar Cell

Application of arginine-doped PEDOT:PSS as a hole transfer layer in perovskite solar cells

Enhancing the Interface Contact of Stacking Perovskite Solar Cells with Hexamethylenediammonium Diiodide-Modified PEDOT:PSS as an Electrode

Hydroxyl‐Rich d ‐Sorbitol to Address Transport Layer/Perovskite Interfacial Issues toward Highly Efficient and Stable 2D/3D Tin‐Based Perovskite Solar Cells

Bifacial Modified Charge Transport Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Fine‐Tuning Conformation of PEDOT Chains Enables Simultaneously Enhanced Conductivity, Work Function, Transmittance, and Waterproofness in PEDOT:PSS Interlayer for Highly Efficient and Stable Organic Photovoltaics

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”

PEDOT:PSS/CuCl Composite Hole Transporting Layer for Enhancing the Performance of 2D Ruddlesden-Popper Perovskite Solar Cells

Undoped 2,2′,7,7′-tetrakis (N,N-p-dimethoxy-phenylamino)-9,9′-spirobifluorene and PbS binary hole-transporter for efficient and stable planar perovskite solar cells