Efficient Generation Of High-Order Modes From All Few-Mode Fiber Lasers

Teng Wang,Ao Yang,Fan Shi,Yiping Huang,Jianxiang Wen,Xianglong Zeng

DOI: https://doi.org/10.1109/acp.2018.8595934

2018-01-01

Abstract:We experimentally demonstrated a switchable multi-wavelength few-mode fiber (FMF) high-order mode (HOM) laser using Sagnac interferometer, and a Q-switched all-FMF HOM laser based on saturable absorber and nonlinear polarization rotation technique.

What problem does this paper attempt to address?

High-order Mode Lasing in All-Fmf Laser Cavities

Teng Wang,Ao Yang,Fan Shi,Yiping Huang,Jianxiang Wen,Xianglong Zeng

DOI: https://doi.org/10.1364/prj.7.000042

IF: 7.6

2018-01-01

Photonics Research

Abstract:We experimentally demonstrate two kinds of all few-mode fiber (FMF) ring lasers with high-order mode (HOM) oscillation in the laser cavity. One kind is a switchable-wavelength all-FMF HOM laser with an output of tunable optical vortex beams (OVBs); the other is a Q-switched all-FMF HOM laser with an output of pulsed cylindrical vector beams (CVBs). The lasers are composed of all-FMF components and few-mode erbium-doped fiber. A Sagnac interferometer made of a 3 dB FMF coupler functions as the wavelength selector, and switchable multiwavelength tunable OVBs are experimentally realized. Carbon nanotube-based saturable absorbers and the nonlinear polarization rotation technique are used to achieve Q-switched CVB lasers. This is the first report, to our knowledge, on the generation of switchable-wavelength and Q-switched HOM beams in all-FMF laser cavities.
Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Yiwei Xie,Songnian Fu,Minming Zhang,M. Tang,P. Shum,Deming Liu

DOI: https://doi.org/10.1016/j.optcom.2013.05.016

IF: 2.4

2013-01-01

Optics Communications

Abstract:Few-mode-fiber (FMF) based mode division multiplexing (MDM) is a promising technique to further increase the transmission capacity of single mode fibers. We propose and numerically investigate a fiber-optical mode converter (MC) using long period gratings (LPGs) fabricated on the FMF by point-by-point CO2 laser inscription technique. In order to precisely excite three modes (LP01, LP11, and LP02), both untilted LPG and tilted LPG are comprehensively optimized through the length, index modulation depth, and tilt angle of the LPG in order to achieve a mode contrast ratio (MCR) of more than 20dB with less wavelength dependence. It is found that the proposed MCs have obvious advantages of high MCR, low mode crosstalk, easy fabrication and maintenance, and compact size.
3 W Average-Power High-Order Mode Pulse in Dissipative Soliton Resonance Mode-Locked Fiber Laser

Longtao Wang,Jiangtao Xu,Jiafeng Lu,Linping Teng,Zhengqian Luo,Fufei Pang,Xianglong Zeng

DOI: https://doi.org/10.1515/nanoph-2021-0317

IF: 7.5

2021-01-01

Nanophotonics

Abstract:Recently high-order modes (HOMs) lasers have been extensively investigated due to their potential applications in mode-division multiplexing. In this paper, we present two schemes of generating HOMs from the mode-locked fiber lasers (MLFLs) in the dissipative soliton resonance (DSR) regime. Watt-level HOM outputs are implemented through intra-cavity mode conversion. 3 W average-power HOMs with an efficiency slope of 25% can be obtained based on an MLFL in the DSR regime, which is achieved by incorporating a long-period fiber grating (LPFG) and a dual-resonant acoustically induced fiber grating (AIFG), respectively. Their different spectrum responses enable flexible mode conversion in the MLFLs. Both fiber mode converters are exploited to show their robust capability of efficient mode manipulation. The MLFL with an LPFG inserted in the cavity can achieve wide-bandwidth intra-cavity optical vortex beams (OVBs) near the dispersion turning around point because of the pulses of the fundamental mode and high-order vortex eigenmodes oscillating in the cavity with the same group velocity to form spatiotemporal mode locking. The MLFL based on a dual-resonant AIFG can perform the function of fast switching (∼0.3 ms) in LP01, LP11a, and LP11b modes with a high modal purity of 96%. These different modes with high-energy pulses can be flexibly switched with programmable radio frequency modulation. Furthermore, a quarter-wave plate and a polarizer are employed at the output of fiber laser to realize the controllability of the mode field, which is possible to generate a controllable mode field of OVBs based on the first-order Poincaré sphere. This control method can be integrated with the MLFLs to extend the flexibility of high-power HOMs generation.
High-order mode erbium-doped fiber laser based on cavity LPFG converters.

Yicong Liu,Pan Wang,Mao Feng,Qingbo Wang,Jiangyong He,Wenzhe Chang,Zhi Wang,Yange Liu

DOI: https://doi.org/10.1364/AO.479911

IF: 1.9

2023-01-01

Applied Optics

Abstract:We experimentally investigate high-order mode (HOM) generation at a wavelength of 1.5 µm in an all-fiber erbium-doped laser based on a long-period fiber grating (LPFG). The CW laser emission is achieved when the pump power is above the threshold of 10 mW. An LPFG with a 15 dB bandwidth of 147.76 nm from 1502.76 nm to 1650.52 nm is used as a mode converter inside the cavity. The generation of the broadband mode is ultimately obtained. By using a few-mode output coupler, we can obtain the intracavity conversion of the linear polarization mode. Single-, dual-, triple-, and quadruple-wavelength operations can be achieved by changing the polarization state of the polarization controllers in the cavity. The tunable range of the output wavelengths is up to ∼23.20 . The output power and slope efficiency of the HOMs are presented and discussed. We believe our work might benefit the investigation of HOM fiber lasers, and might be further applied to the intracavity conversion of the linear polarization mode or orbital angular momentum beams.
High-order modes erbium-doped fiber laser based oncavity LPFG converters

Yicong Liu,Pan Wang,Mao Feng,Qingbo Wang,Jiangyong He,Wenzhe Chang,Zhi Wang,Yange Liu

DOI: https://doi.org/10.1364/ao.479911

IF: 1.9

2022-01-01

Applied Optics

Abstract:We experimentally investigate high-order mode (HOM) generation at a wavelength of 1.5 µm in an all-fiber erbium-doped laser based on a long-period fiber grating (LPFG). The CW laser emission is achieved when the pump power is above the threshold of 10 mW. An LPFG with a 15 dB bandwidth of 147.76 nm from 1502.76 nm to 1650.52 nm is used as a mode converter inside the cavity. The generation of the broadband L P 11 mode is ultimately obtained. By using a few-mode output coupler, we can obtain the intracavity conversion of the linear polarization mode. Single-, dual-, triple-, and quadruple-wavelength operations can be achieved by changing the polarization state of the polarization controllers in the cavity. The tunable range of the output wavelengths is up to ∼ 23.20 n m . The output power and slope efficiency of the HOMs are presented and discussed. We believe our work might benefit the investigation of HOM fiber lasers, and might be further applied to the intracavity conversion of the linear polarization mode or orbital angular momentum beams.
All-fiber High-Order Transverse-Mode Switchable Laser

Xinhua Jiang,Junna Yao,Siyuan Zhang,Anting Wang

DOI: https://doi.org/10.1117/12.2655577

2022-01-01

Abstract:We propose and demonstrate a simple method to generate an all-fiber high-order transverse-mode switchable laser using a few-mode Bragg fiber grating (FM-FBG). The switchable output of the LP02 mode, LP11 mode, and LP01 modes is precisely realized by adjusting the operating wavelength in the cavity, which breaks through the limitation of only two low-order modes in most reports about all-fiber transverse-mode switchable lasers. The slope efficiencies for the three modes are 2.5%, 5.9%, and 9.3%, respectively. The central wavelengths of the lasers are 1530.2 nm, 1531.3 nm, and 1532.1 nm, respectively, and the corresponding side mode suppression ratios are -61 dB, -67 dB, and -65 dB, which ensures the purity of the modes. This work has huge potential applications in sensing, mode division multiplexing, optical communication, laser processing, and surface plasmon excitation.
High-efficiency Mode-Locked Fiber Laser with a Switchable Oscillating Transverse Mode in an All Few-Mode Fiber Linear Cavity.

Jialiang Lv,Chuansheng Dai,Hongxun Li,Xuexiao Ma,Jiaqiang Lin,Chun Gu,Peijun Yao,Lixin Xu,Qiwen Zhan

DOI: https://doi.org/10.1364/oe.448550

IF: 3.8

2022-01-01

Optics Express

Abstract:In this paper, an oscillating transverse mode switchable mode-locked fiber laser with a few-mode fiber linear cavity is proposed and demonstrated. An artificial filter is used to realize the mode gain modulation of the laser. The stable mode-locked pulsed operation with switchable wavelength is easily achieved and the oscillating transverse mode can be flexibly switched between the fundamental mode and high-order mode by adjusting the polarization controller. The mode-locked fiber laser directly oscillates in the high-order mode stably with a slope efficiency of as high as 12%, and the corresponding operating wavelength, repetition rate as well as pulse duration are 1054.07 nm, 22.662 MHz, 31.5 ps, respectively. Besides, a cylindrical vector beam with a high mode purity of 98.6% is obtained by removing the degeneracy of the LP11 mode. This compact and high-efficiency mode-locked fiber laser operating in switchable transverse mode has the potential application for laser processing, particle trapping, bioimaging, and mode division multiplexing system.
Self-starting High-Order Mode Oscillation Fiber Laser.

Jialiang Lv,Xuexiao Ma,Xiazhong Liu,Jing Luo,Peijun Yao,Lixin Xu,Qiwen Zhan

DOI: https://doi.org/10.1364/oe.473080

IF: 3.8

2022-01-01

Optics Express

Abstract:In this paper, we proposed and demonstrated two kinds of all few-mode fiber lasers with self-starting high-order mode (HOM) oscillation. The fundamental mode can be completely suppressed by using a bandpass filter with a few-mode fiber pigtail. In the continuous-wave (CW) regime, the fiber laser directly oscillates in HOM with a signal-to-noise ratio as high as 70 dB, and the slope efficiency is up to 46%. The self-starting HOM mode-locked pulse can be easily achieved by employing a saturable absorber. The HOM oscillation pulsed fiber laser stably operates at 1063.72 nm with 3dB of 0.05 nm, which can deliver cylindrical vector beams with a high mode purity of over 98%. To our knowledge, this is the first demonstration for self-starting HOM direct oscillation in stable CW and pulsed operation states without additional adjustment. This compact and stable HOM fiber laser with a simple structure can have important applications in materials processing, optical trapping, and spatiotemporal nonlinear optics. Moreover, this work may offer a promising approach to realizing high-power fiber laser with arbitrary HOMs stable output.
Multi-wavelength Oscillating and Transverse Mode Switching in an All Few-Mode Fiber Laser Based on Polarization Manipulation

Hongxun Li,Ke Yan,Zhipeng Dong,Runxia Tao,Chun Gu,Peijun Yao,Lixin Xu,Rui Zhang,Jingqin Su,Qiwen Zhan

DOI: https://doi.org/10.1016/j.optlastec.2019.03.045

2019-01-01

Abstract:We have proved the polarization dependence of the fiber Bragg grating (FBG), and demonstrated an all few-mode fiber laser that can realize multi-wavelength oscillation and switchable transverse modes simultaneously based on the polarization dependence of FBG. In this fiber laser, single-, dual- and triple-wavelength oscillation can be realized by merely adjusting the polarization controller inside the cavity. Three output transverse modes including fundamental mode, second-order mode, and hybrid modes can be switched as the laser operates at three different single-wavelengths correspondingly. In addition, azimuthally and radially polarized beams can be easily generated. This all few-mode fiber laser scheme may play a more significant role in wavelength division multiplexed (WDM) systems, mode division multiplexed (MDM) systems, sensing, and so on.
High-order-mode Brillouin Random Fiber Laser Based on Distributed Rayleigh Scattering in All-Few Mode Fiber Half-Open Cavity

Zizhou Wei,Liang Zhang,Yichun Li,Wei Chen,Han Wang,Mengshi Zhu,Xianglong Zeng,Fufei Pang,Tingyun Wang

DOI: https://doi.org/10.1109/icocn59242.2023.10236107

2024-01-01

Abstract:A high-order-mode (HOM) Brillouin random fiber laser with an all-few-mode-fiber half-open linear cavity was experimentally demonstrated, highlighting a $610-\text{Hz}$ narrow-linewidth LP 11 mode laser emission with high purity of $\sim 91.3 \%$.
High-order mode Yb-doped fiber lasers based on mode-selective couplers.

Yiping Huang,Fan Shi,Teng Wang,Xiaomin Liu,Xianglong Zeng,Fufei Pang,Tingyun Wang,Pu Zhou

DOI: https://doi.org/10.1364/OE.26.019171

IF: 3.8

2018-01-01

Optics Express

Abstract:We experimentally investigate high-order modes (HOMs) generating at the wavelength of 1.0 mu m in all-fiber Yb-doped lasers based on mode-selective couplers (MSCs). Broadband MSCs for HOMs conversion are achieved by optimizing the phase-matching condition at 1.0 mu m. Efficient generation of HOMs is demonstrated with the MSCs inserted both into continuous-wave and mode-locked fiber lasers. The slope efficiencies of HOMs (LP11 LP02 and LP21) are presented and discussed. Additionally. cylindrical vector and orbital angular momentum beams are produced out of the MSCs by controlling the polarization states. The results show proof-of-concept implementation of the MSCs, which enables high efficiency of HOMs generation especially in pulsed fiber lasers and holds promising applications in laser material processing. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Transverse-Mode Switchable Few-Mode Ring Fiber Lasers

Li Xiaofeng,Li Zhe,Wu Wenmao,Li Juhao,Ren Fang

DOI: https://doi.org/10.3788/aos202040.1406002

2020-01-01

Acta Optica Sinica

Abstract:A few-mode ring fiber laser based on an all-fiber mode multiplexer/demultiplexer (MUX/DEMUX) was designed, which achieved switchable lasing output in LP01, LP11, LP21, and hybrid modes. Experimental results show that the output lasing mode of the ring fiber laser can be switched between the three lowest-order linearly polarized (LP) modes and hybrid modes by employing a low mode-crosstalk all-fiber mode MUX/DEMUX and a simple 4 x 1 optical switch. Thresholds of 10, 60, and 80 mW and slope efficiencies of 1.2%, 0.82%, and 0.56% were obtained for the, LP01, LP11, LP21 mode operations, respectively. Numerical simulation and parameter optimization of the designed few-mode ring fiber laser structure adequately resolved the wavelength shift problem, with a line width of 3 dB less than 0.032 nm being realized.
High-order mode fiber laser based on few-mode fiber gratings

Shuang Wang,Xiao Liu,Haiyan Wang,Guijun Hu

DOI: https://doi.org/10.1016/j.optlastec.2022.108416

2022-07-02

Abstract:We propose and experimentally demonstrate a high-order mode fiber laser based on few-mode fiber gratings. The fiber laser has the structure of three sub-ring-cavities. LP 01 mode, LP 11 mode and LP 21 mode can be obtained by different few-mode long-period fiber gratings. The reflection of LP 01 mode, LP 11 mode and LP 21 mode can be realized by different few-mode fiber Bragg gratings. Therefore, the simultaneous lasing of LP 01 mode, LP 11 mode and LP 21 mode at the same wavelength can be achieved. A few-mode fiber Bragg grating functions as a discrete filter. By adjusting a polarization controller, switchable output among single-, dual- and triple-wavelength lasing can be realized, and three wavelengths correspond to LP 01 mode, the mixing of LP 01 mode and LP 11 mode, and LP 11 mode. Therefore, the simultaneous lasing of different modes at the same wavelength, and the simultaneous lasing of different modes at different wavelengths can be achieved in this fiber laser, which can be applied to optical communication systems based on mode-division multiplexing-wavelength-division multiplexing.

optics,physics, applied
High-order Mode Direct Oscillation of Few-Mode Fiber Laser for High-Quality Cylindrical Vector Beams.

Teng Wang,Fan Shi,Yiping Huang,Jianxiang Wen,Zhengqian Luo,Fufei Pang,Tingyun Wang,Xianglong Zeng

DOI: https://doi.org/10.1364/oe.26.011850

IF: 3.8

2018-01-01

Optics Express

Abstract:Generation of high-order modes with high quality is important for the application of cylindrical vector beams in fibers. We experimentally demonstrated high-order LP11 mode generation and amplification with a broad bandwidth in an all few-mode fiber laser. A wavelength-division-multiplexing (WDM) mode selective coupler (MSC) is proposed to achieve efficient mode conversion from LP01 mode to LP11 mode, but also combine high-order LP11 modes at the wavelengths of 980/1550 nm. To the best of our knowledge, this is the first report on the high-order mode oscillation in an all few-mode fiber laser. LP11 mode and cylindrical vector beams including radially and azimuthally polarized beams are obtained with high modal purity. The purity of the generated high-order modes are all in excess of 95%.
Simple Method to Generate All Fiber CVBs and LP01 Mode Switchable Laser

Xinhua Jiang,Anting Wang

DOI: https://doi.org/10.1117/12.2653548

2022-01-01

Abstract:We propose and demonstrate a simple method to generate an all-fiber CVBs and LP01 mode switchable laser using a few-mode fiber Bragg grating. A few-mode circulator is used to output the excited high-order modes. By adjusting the temperature to change the laser wavelength in the cavity, switching of the fundamental mode and the radial and azimuthally polarized laser is realized and their efficiencies are 10.76% and 5.55%, respectively. The purity of the radial and the azimuthally polarized beam is higher than 98%. The working wavelength of the radial and the azimuthally polarized beam is 1549.6nm. The 30 dB bandwidth is less than 0.15 nm, and the side mode suppression ratio is more than 73dB.
Transverse Mode Switchable Fiber Laser with a Multimodal Interference-Based Beam Shaper

Wentan Fang,Xiaohui Ma,Yong Zhou,Wei Zhang,Xiaolin Chen,Song Huang,Meisong Liao,Yasutake Ohishiand,Weiqing Gao

DOI: https://doi.org/10.1364/ol.478033

2022-01-01

Abstract:We propose a Yb-doped fiber laser with an all-fiber beam shaper based on a single-mode-graded-index multimode-few-mode fiber (SMF-GIMF-FMF) structure. The excitation coefficients of the mode can be adjusted continuously by changing the GIMF length. Numerical simulations are performed to investigate the beam shaping dynamics in the fiber structure. Through adding the simple device geometry in the laser cavity, the switchable output between the fundamental transverse (LP01) mode and the second-order transverse (LP11) mode can be achieved. Cylindrical vector beams with high mode purity are also shown by removing the degeneracy of the LP11 mode.
976-nm pulse-type switchable all-fiber mode-locked laser based upon nonlinear multimode interference

Hongyi Chen,Qaisar Hayat,Jiachen Wang,Geguo Du,Fanlong Dong,Linpeng Yu,Xing Luo,Jinzhang Wang,Peiguang Yan,Junzhan Chen,Jingwei Yang,Xing Liu,Qitao Lue,Chunyu Guo,Shuangchen Ruan

DOI: https://doi.org/10.1016/j.infrared.2023.105099

IF: 2.997

2023-12-31

Infrared Physics & Technology

Abstract:A 976-nm pulse-type switchable mode-locked fiber laser is experimentally demonstrated, for the first time to our knowledge, with a single mode fiber-graded index multimode fiber-single mode fiber (SMF-GIMF-SMF) structure-based saturable absorber (SA). The GIMF is bent into a given state to strengthen its effect on establishing mode-locking. By adjusting the intra-cavity polarization controller, the switching between dissipative solitons (DSs) and noise-like pulses (NLPs) can be achieved. Meanwhile, we also realize a second harmonic mode-locking (HML) in the same laser cavity. The laser provides a solution to realize 976 nm mode-locking operation with a simple and low-cost configuration and can serve as a potential tool for various applications.

optics,physics, applied,instruments & instrumentation
Multimode Oscillation Q-switched Erbium-Doped Fiber Laser with a Few-Mode Fiber Cavity

Si-meng Han,Kang Yang,Zhen-hong Wang,Yan-ge Liu,Zhi Wang

DOI: https://doi.org/10.1007/s11801-018-8068-z

2018-01-01

Optoelectronics Letters

Abstract:We propose and demonstrate experimentally a multimode oscillation Q-switched erbium-doped fiber laser with a few-mode fiber cavity. The different coupling processes of reflection peaks of fiber Bragg gratings (FBGs) which act as cavity mirrors allow the different oscillating states. We obtain microsecond light pulse output states whose oscillation and output beams have different mode compositions, including high order mode. Such a structure enables the high order mode oscillation in the whole cavity with an all-fiber structure, which has potential applications in mode-division multiplexed systems and research of multimode nonlinear effect.
Transverse Modes Switchable Fiber Laser Based on Few-Mode Fiber Bragg Grating

Sun Biao,Wang Anting,Zhou Yong,Gu Chun,Lin Zhongxi,Xu Lixin,Ming Hai

DOI: https://doi.org/10.1117/12.999579

2012-01-01

Abstract:Based on the few-mode fiber Bragg grating's reflection characteristics, we propose and demonstrate a transverse modes switchable fiber laser fiber laser, fundamental mode and 1st higher order modes, and the states be switched by tuning the laser's oscillating wavelength. The radial vector beam is also obtained by splitting the degenerated 1st higher order modes.
Mode-Locked Vortex Fiber Laser Based on High-Order Mode Conversion

Haocun Wu,Jiangtao Xu,Longtao Wang,Linping Teng,Si Lv,Fufei Pang,Xianglong Zeng

DOI: https://doi.org/10.1109/icicn52636.2021.9673885

2021-11-25

Abstract:We summarize two kinds of mode-locked fiber lasers (MLFLs) that generate intra-cavity optical vortex beams (OVBs) based on long period fiber gratings (LPFGs) and implement extra-cavity hybrid mode control with another kind of all-fiber mode converter called acoustically-induced fiber grating (AIFG). Firstly, the LPFG we used works at the turn-around point (TAP). Since mode conversion through TAP-LPFG can produce the complete set of eigenmodes of LP11 mode, OVBs are then generated by inducing a phase difference of $pi/2$ to the eigenmodes. Secondly, the 1.94 W average-power mode-locked pulses come from a MLFL in the dissipative soliton resonance (DSR) regime. The linear cavity is formed by two fiber loop mirrors (FLMs) whose splitting ratios are 50/50 and 5/95. The 5/95 FLM operates as a nonlinear optical loop mirror (NOLM) which aims at initiating stable DSR. The output fundamental mode is then fully or partially converted to high-order mode (HOM) through AIFG. Mode patterns are captured through an optical imaging system. Taking the advantage of all-fiber mode converters, our approach may expand the diversity of mode control under high-power condition and other researches in high-power fiber lasers.

Efficient Generation Of High-Order Modes From All Few-Mode Fiber Lasers

High-order Mode Lasing in All-Fmf Laser Cavities

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

3 W Average-Power High-Order Mode Pulse in Dissipative Soliton Resonance Mode-Locked Fiber Laser

High-order mode erbium-doped fiber laser based on cavity LPFG converters.

High-order modes erbium-doped fiber laser based oncavity LPFG converters

All-fiber High-Order Transverse-Mode Switchable Laser

High-efficiency Mode-Locked Fiber Laser with a Switchable Oscillating Transverse Mode in an All Few-Mode Fiber Linear Cavity.

Self-starting High-Order Mode Oscillation Fiber Laser.

Multi-wavelength Oscillating and Transverse Mode Switching in an All Few-Mode Fiber Laser Based on Polarization Manipulation

High-order-mode Brillouin Random Fiber Laser Based on Distributed Rayleigh Scattering in All-Few Mode Fiber Half-Open Cavity

High-order mode Yb-doped fiber lasers based on mode-selective couplers.

Transverse-Mode Switchable Few-Mode Ring Fiber Lasers

High-order mode fiber laser based on few-mode fiber gratings

High-order Mode Direct Oscillation of Few-Mode Fiber Laser for High-Quality Cylindrical Vector Beams.

Simple Method to Generate All Fiber CVBs and LP01 Mode Switchable Laser

Transverse Mode Switchable Fiber Laser with a Multimodal Interference-Based Beam Shaper

976-nm pulse-type switchable all-fiber mode-locked laser based upon nonlinear multimode interference

Multimode Oscillation Q-switched Erbium-Doped Fiber Laser with a Few-Mode Fiber Cavity

Transverse Modes Switchable Fiber Laser Based on Few-Mode Fiber Bragg Grating

Mode-Locked Vortex Fiber Laser Based on High-Order Mode Conversion