Abstract:A single longitudinal mode (SLM) parity-time (PT) symmetric Brillouin fiber laser (BFL) based on z-cut lithium niobate phase modulator (LN-PM) Sagnac loop with Hz level linewidth is proposed and experimentally verified. A 10 km single-mode fiber provide SBS gain, while an LN-PM Sagnac loop consisting of an LN-PM and two polarization controllers (PCs) is used to achieve PT symmetry. Two mutually linked feedback loops supporting orthogonally polarized light are created by utilizing inherent birefringence of LN waveguide from LN-PM without electrical signal modulation. One of the feedback loops experiences gain in a clockwise direction and the other loss in a counterclockwise direction. The polarization state of the stokes injected into the LN-PM is controlled by adjusting the PC, and SLM BFL can be achieved when the gain and loss are well matched and exceed the coupling coefficient to break the PT symmetry. Compared with existing BFL studies, this design does not call for frequency matching of several composite cavity structures or precise control of ultra-narrow bandwidth bandpass filters. In addition, a frequency-locking system based on Pound-Drever-Hall technology is employed to lessen the instability and external disturbances brought on by the ring cavity. In the experiment, the linewidth of PT symmetry BFL based on LN-PM Sagnac loop is 3.85 Hz, according to the measured linewidth of 77 Hz at the 20 dB power point. A 65 dB optical signal-to-noise ratio and a 43 dB maximum side mode suppression ratio are measured. Furthermore, the PT symmetry BFL's wavelength is tuned between 1550 and 1550.41 nm.

Mode-selective Few-Mode Brillouin Fiber Lasers Based on Intramodal and Intermodal SBS.

High-Order Mode Brillouin Fiber Lasers Based on Intra- and Inter-Modal SBS

Single- and dual-wavelength fiber laser with multi-transverse modes

Transverse-Mode Switchable Few-Mode Ring Fiber Lasers

Transverse Mode Switchable Fiber Laser with a Multimodal Interference-Based Beam Shaper

High-order-mode Brillouin Random Fiber Laser Based on Distributed Rayleigh Scattering in All-Few Mode Fiber Half-Open Cavity

Single Longitudinal Mode Parity-Time Symmetric Brillouin Fiber Laser Based on Lithium Niobate Phase Modulator Sagnac Loop

Dynamic mode-switchable and wavelength-tunable Brillouin random fiber laser by a high-order mode pump

Spatial-Mode Switchable Ring Fiber Laser Based on Low Crosstalk Few-mode Fiber and Mode MUX/DEMUX

Single-longitudinal-mode self-seeded Brillouin fiber laser with an ultra-narrow linewidth achieved utilizing a triple-ring resonator

Selective transverse mode emission from all polarization-maintaining fiber lasers

Broadband Brillouin Slow Light Based on Multifrequency Phase Modulation in Optical Fibers

Efficient Generation Of High-Order Modes From All Few-Mode Fiber Lasers

Spatial Mode and Wavelength Switchable Erbium-Doped Fiber Laser Based on a Fiber Beam Shaper.

Design of Self-Matching Photonic Lantern for High-Order Transverse-Mode Laser Systems

High-order mode fiber laser based on few-mode fiber gratings

Spatial-Mode Switchable, Multi-Wavelength All-Fiber EDF Laser Based on Low Modal Crosstalk Mode MUX/DEMUX

Mode-Locked All-Fiber Laser Emitting Two-Color High-Order Transverse Mode

Nonlinear Multimode Interference-Based Dual-Color Mode-Locked Fiber Laser

Mode-Selective Photonic Lanterns with Double-Clad Fibers

Stimulated Brillouin Scattering Model in Multi-Mode Fiber Lasers