The Minimum Control System Based On Ethernet Network

Jiang Jian-Ming,Wang Zheng-Hong,Ma Zheng-Hua,Zhu Zheng-Wei

2009-01-01

Abstract:A practical design of using the abundant resourse of Ethernet is introduced, which applies SX52BD MCU to set up a microoperation system. It is convenient for people to remotely control the industrical and familial equipment.

What problem does this paper attempt to address?

EPA-based Open Network Control System

Dongqin Feng,Wenjun Huang,Jianxiang Jin,Jian Chu

DOI: https://doi.org/10.1109/icca.2003.1595168

2003-01-01

Abstract:The Ethernet is more and more used in the industrial environments. Because of the non-deterministic protocol of CSMA/CD, Ethernet is thought not to be suitable for the control of real time applications. With the worldwide application and development of Ethernet, its transmission rate is considered sufficiently high enough to estimate that all messages can be received inside a predefined temporal window. Especially, using Ethernet in industrial network will brings a lot of advantages: (1) consistency with the other communication systems installed in the enterprise; (2) employment of the same hardware all over the factory; (3) short cycle-times due to the high transmission speed; (4) large availability of chips implementing the MAC protocol, etc. In this paper, we first analyze the real-time capability of Ethernet and features of traffic for industrial network. Then, we propose some technologies for the design of an Ethernet-based real-time application. Finally, we present an EPA (Ethernet for Plant Automation)-based open network control system.
Networked Control System Design and Implementation

JM Zhang,SQ Wang

DOI: https://doi.org/10.1109/icmlc.2002.1174479

2002-01-01

Abstract:At present, the distribution of a control system based on a network is a "hot" research subject in the field of process control. This paper designs and implements a network-based process control system, which possesses functions such as remote control, clock synchronization, and a friendly man-machine interface. Simulation results over a university campus network confirm that the network-based control system is feasible and effective.
Design and Analysis of Intelligent Greenhouse Environment Control System Based on Industrial Ethernet

胡太君,姜力群,王剑平

DOI: https://doi.org/10.13733/j.jcam.issn.2095-5553.2003.06.009

2003-01-01

Abstract:From the status of the greenhouse control system , this paper analyzes the mechanism of greenhouse environment distributed control system , also gives the disadvantage of this system which is not adapt to the desire of modern greenhouse control . what' s more , it introduces to us that how to form control net system through the industrial Ethernet . Finally ,it gives the characters and applying foreground of industrial Ethernet control system .
The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

刘康,王宣银

DOI: https://doi.org/10.3969/j.issn.1000-0682.2004.01.010

2004-01-01

Abstract:This paper presents an ethernet controller consisting of the RTL8019AS and the implementing of the TCP/IP in an embeded microcontroller system,which usually has a limit memory space.The remote data communication between the user and the RS-485 field bus has been realized in this system along with the analysis of its performance.
The Remote Fan Control Based on Real-Time Ethernet

XIE Mingwei,ZHU Rusong,GU Zhenghua

DOI: https://doi.org/10.3969/j.issn.1009-671x.2011.02.06

2011-01-01

Abstract:To overcome the bad real-time performance of remote control system usually used in industrial field,a method is given to implement remote control based on real-time Ethernet,which combines real-time Ethernet,virtual instrument and optic fiber transmission.The result of experiment indicates that the remote control system based on real-time Ethernet has high reliability,better real-time performance and stronger anti-jamming ability,compared with the common PLC remote control system.It has great value in the control of large industrial field.
The Design of Host-Computer Software for the EPA Control Net

TAO Li,FENG Dong-qin,JIN Jian-xiang,CHU Jian

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.05.006

2006-01-01

Abstract:This paper presents a design conception for a hostcomputer software system applicable to the EPA industrial control net.This software system comprises configuration software,monitor software and database along with a kind of additional net management software.The paper also makes studies of the design of the function and program frame-work of the net management software,and puts forward a feasible project for implementation.
Design and Implementation of Mini-computer Control System

TANG Jie,XIAO De-yun,ZHANG Zheng-fang

DOI: https://doi.org/10.3969/j.issn.1001-3695.2006.08.068

2006-01-01

Abstract:The mini-computer control system is developed mainly for smaller scale industry applications.Adopting the embe-(dding) system and Modbus field bus technology,opening intelligent I/O module and real-time on-line control strategy,the system has flexible controlling and human-machine interface,better reliability and stability,strong extensibility and low price,etc.
A Network Control System of Home Appliances Based on Embedded Techniques

GONG Chen,YING Teng-yun,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1002-6886.2007.05.018

2007-01-01

Abstract:Aimed at the need of network and intelligence of today's home electric equipments,a type of intelligence home appliances control system is invented,applying various techniques of wireless network.The system actualizes remote control,real-time monitor and other functions to home appliance,based on embedded techniques.This article introduces the design of the hardware and software of the system.
OPC BASED ETHERNET CONTROL AND MANAGEMENT

范兴刚,王智,孙优贤,汪琳

DOI: https://doi.org/10.3969/j.issn.1002-0411.2003.02.004

2003-01-01

Information and Control

Abstract:The network management control is a process that makes network high-efficiency. SNMP is the most popular network management. Its key is the group of objects that was stored in management agency and controlled by management station. ASN.1 defines and encodes the objects. All of objects are in MIB. OPC(OLE for Process Control) provides standard interface for different equipment. It makes it easy to obtain information from other equipment. This is the basis for ethernet control.
The Ethernet Network Manipulative System Based on RTL8019AS

Ma Dongmei,Zhengwei Zhu

2012-01-01

Abstract:The Ethernet network is widely used in industry. A practical design of using the abundant resourse of Ethernet is introduced, which applies RTL8019AS to set up a microoperation system. The cost of this system is cheap and simple to realize. KeywordsEthernet RTL8019AS Industry
Design and implementation of embedded Ethernet based on the RX62N microcontroller

Zhihong Guo,Chun Shi,Gang Wu

DOI: https://doi.org/10.1109/CAC.2013.6775729

2013-01-01

Abstract:In recent years, along with the development of industrial control equipments and electric vehicles, the control and communication communities have witnessed the growing demand of system interconnection, intercommunication, and interoperation. Therein a key issue is to connect these objects to a network through embedded control chips. In this paper, we design and implement an embedded Ethernet system based on the Renesas RX62N. The Renesas RX62N 32-bit chip has an embedded Ethernet Controller. To achieve stable and reliable embedded network connection, we transplant μC/OS-II, a realtime operating system written by Micriμm Company, to the platform; In the TCP/IP layer, we write device drivers of the DP83640 physical chip and the RX62N Ethernet controller such that they are compatible to the μC/TCP-IP protocol stack; In the application layer, the main challenge is dynamic IP address assignment, which is solved by μC/DHCPc protocol stack. After obtaining the address, a simple TCP client-server socket application is implemented. The embedded Ethernet system is verified in a real-world network environment. Experiments demonstrate that the system is able to fulfill basic network communication.
The Control System of Buildings Automation Based on Embedded System Techniques

LIU Haitao,LI Xiaorun

DOI: https://doi.org/10.3969/j.issn.1002-6886.2008.03.026

2008-01-01

Abstract:In order to solve problem that the control points of intelligent buildings varies and quantity are large,this dissertation presents a design of the control system of intelligent buildings based on embedded system techniques.The system uses a MODBUS protocol,485/232 bus structure,freely combines district controllers and control modules to form the control network which covers a maximum communication distance of 1200m.Now the system functions well.
Design and Implementation of Socket-Based-Network Connections Smart Home System

Yu-Han Liu,Qian Hu,Min Xiao

DOI: https://doi.org/10.1109/IMCCC.2016.113

2016-07-01

Abstract:A smart home control system could link independent electric appliances together 'intelligently' and provide comprehensive, fast and smooth exchange of information. This system gives people real-time information control, which improves their life quality. In this study, an embedded smart home system based on socket network connections was designed using ARM9 development board and embedded Linux operating system. This system could control all the subsystems that are related with home life, such as light control and sound control. Based on C/S structure, the designed smart home system has rich hardware and software resources, low cost and low power consumption, as well as easy expansion, update and maintenance. This system has practical values.

Engineering,Computer Science
The Electrical Ethernet Monitoring System Based on Embedded Web Server

Jian-ming Jiang,Tong-guang Ni,Zheng-hua Ma,Zheng-wei Zhu

DOI: https://doi.org/10.1109/iccae.2010.5451844

2010-01-01

Abstract:In the monitoring system,the existing resource of Ethernet is used to remotely monitor power network parameters. A practical design of embedded Web server for power network monitoring is introduced, which applies high speed MCU (SX52BD) to conveniently link to Ethernet. Adopting Ethernet interface control mode, the remote network monitoring of power network is realized under Windows.
Real-time Communication Based on MMS+TCP/IP+ Ethernet for Embedded CNC

Xuhui Zhang,Qin Liu,Sunan Wang

DOI: https://doi.org/10.1109/WiCom.2008.1361

2008-01-01

Abstract:Networked CNC (computer numerical control) system is the foundation for realizing automation, intelligent and globalization of manufacturing. The transparent model, real-time and deterministic communication of industrial Ethernet is urgently needed. The communication platform based on Manufacturing Message Specification (MMS), TCP/IP and Ethernet is the trend of the next industrial automation communication system. This paper put forward a reference model based on MMS+TCP/IP+Ethernet to achieve the real-time seamlessly data exchange for CNC in distributed environment. The networked CNC is constructed by main control board based on ARM microcontroller, motion controller (based DSP and CPLD), real-time OS of RTLinux and user graphic interface of MiniGUI. After analyzed the effect factors of real-time communication performance, the key technologies of the platform were discussed, such as communication tasks priority of Ethernet, TCP/IP protocol over Ethernet, real-time network communication models and event-driven scheduling. Finally, and the network experimental results are shown and discussed.
Design and implementation of Ethernet experimental system based on S3C44BOX

Tong Weiming,Lin Jingbo,Gao Lei

DOI: https://doi.org/10.3969/j.issn.1002-4956.2009.08.027

2009-01-01

Abstract:In order to exhibit the key technologies of industry Ethernet,the Ethernet experimental system used in industrial area is designed.This system is based on microcontroller S3C44BOX and Ethernet controller RTL8019AS,and uses keyboard and liquid crystal display as interactive medium.This paper focuses primarily on overall planning and design of the system,hardware design framework,implementation model and main flow charts of the software.An experiment of "using IP protocol to complete sending and receiving data" is analyzed,which is used to show the design method and the key part of the implementation.Practical application shows that every experiment makes users realize the protocol function step by step,so the experimental system can make users master the key communication technologies of industry Ethernet quickly and straightly.
The development of a field controller based on industrial ethernet

Xiao-xia WANG,Wen-jun HUANG,Guo-qing ZHONG,Jian-xiang JIN

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.06.005

2005-01-01

Abstract:In accordance with the requirement of real-time control in the current industrial automation field,a solution to a field controller based on an industrial ethernet is offered,and several significant problems in the field controller are analyzed and solved.The field controller performs excellently in real-time property,openness,reliability,mathematical operation and multi-bus integration.
Networked intelligent controller based on embedded system

Gan Ping Lee,Ming Lee,Hui He Shao,Xu Zhao

DOI: https://doi.org/10.1109/IECON.2004.1432278

2004-01-01

Abstract:The design and development of a Networked Intelligent Controller (NIC) based on embedded system is presented. The developed controller is an intelligent remote unit featuring embedded technology for access control, monitoring and output control. Basically, the controller has data acquisition, computation, transducer and networked communication functions. The device has low power consumption and small size. With Ethernet, control and supervision are accomplished through an industrial local area network. Using a high integrated 32-bit RISC microprocessor combined with serial A/D and D/A converters made the electronic systems compact with high performance. The controller offers the widest range of features and flexibility, with an overall design for reliability, durability and case of installation. Expanded input and output capabilities can be added to maximate its functions. Based on ARM embedded system, the controller can even run operation systems. Such a Networked Intelligent Controller can be used for various applications involved in real-time controls.
Design and Implementation of Embedded System Based on Modbus TCP/IP

Yan Xia Li,Mo Li Zhang,Dan Mei Niu,Xiao Ling Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amr.532-533.667

2012-01-01

Advanced Materials Research

Abstract:It is the requirements of limited resources and realtime in embedded system. Design of network communication system based on embedded system is hard. In this paper, we propose the architecture of embedded network using Modbus TCP/IP protocol, analyze the composition of Modbus TCP/IP protocol. It is that Modbus protocol information can be made in the TCP/IP protocol of the Internet transmission, and thus extend the application of Modbus protocol. The network communication system is designed and implemented on the ARM platform using non-blanking socket in Linux. The system is available, stable and worthy of popularization.
On-line and Real-time Control Cutting System of Robot Based on Ethernet Network

蒋金鹏,颜国正,丁国清,王宏杰,王于,王志武

DOI: https://doi.org/10.3969/j.issn.1000-8829.2001.06.004

2001-01-01

Abstract:The real-time and on-line cutting system of robot based on Ethernet Network have been developed using the techniques of Internet and robot.The system is characterized by rapid， high-efficiency and romote-control.The system will be used extensively in the future.

The Minimum Control System Based On Ethernet Network

EPA-based Open Network Control System

Networked Control System Design and Implementation

Design and Analysis of Intelligent Greenhouse Environment Control System Based on Industrial Ethernet

The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

The Remote Fan Control Based on Real-Time Ethernet

The Design of Host-Computer Software for the EPA Control Net

Design and Implementation of Mini-computer Control System

A Network Control System of Home Appliances Based on Embedded Techniques

OPC BASED ETHERNET CONTROL AND MANAGEMENT

The Ethernet Network Manipulative System Based on RTL8019AS

Design and implementation of embedded Ethernet based on the RX62N microcontroller

The Control System of Buildings Automation Based on Embedded System Techniques

Design and Implementation of Socket-Based-Network Connections Smart Home System

The Electrical Ethernet Monitoring System Based on Embedded Web Server

Real-time Communication Based on MMS+TCP/IP+ Ethernet for Embedded CNC

Design and implementation of Ethernet experimental system based on S3C44BOX

The development of a field controller based on industrial ethernet

Networked intelligent controller based on embedded system

Design and Implementation of Embedded System Based on Modbus TCP/IP

On-line and Real-time Control Cutting System of Robot Based on Ethernet Network