Abstract:Deep high static loading roadway is extremely prone to rock burst under dynamic load disturbance. The “force-energy criterion” for the failure of surrounding rock in such deep roadways and the “energy criterion” for the rock burst was established by considering the stress and energy evolution characteristics of rock burst under this circumstance. Under the engineering background of the main roadway in No.1 mining area of Gaojiapu Coal Mine in Binchang Mining Area, Shaanxi Province, China, the partial stress field and distortion energy field of surrounding rock in the main roadway and the spatial-temporal evolution laws under dynamic load disturbance were simulated and analyzed by using a built-in dynamic module of FLAC3D. Results show that after the dynamic load disturbance, the partial stress and distortion energy are concentrated in the shallow part at two walls of the roadway in the early phase. With the continuous propagation of dynamic load stress wave, the partial stress and distortion energy are transferred to the deep part. The sudden high-energy release occurred in the peak zone of partial stress, leading to the plastic failure of coal and rock mass. Subsequently, the distortion energy was fully accumulated in the original plastic zone and transferred from shallow surrounding rocks to the deep surrounding rocks in the roadway, where the partial stress and distortion energy of coal and rock mass reached the yield conditions. Thus, the original plastic zone was sharply expanded, thereby forming a new plastic zone. The coal and rock mass experienced an approximately static failure when no residual energy (ΔU) was found in it. When ΔU > 0, the rock mass experienced dynamic failure, and ΔU was mainly the volume transformation energy, which is approximately one-half of the total elastic strain energy. ΔU was transformed into the initial kinetic energy of broken coal and rock mass. Thus, the coal and rock mass are burst out. In severe cases, this condition was manifested by the rock burst in the main roadway. An optimization scheme of prevention and control measures for rock burst was proposed on the basis of the above conclusions. The microseismic activity laws before and after the unloading were compared, and a good effect was achieved. The research results can lay a theoretical foundation for predicting and preventing rock bursts in coal mines by actively regulating the disaster-pregnant environment and mitigating the disaster-inducing conditions.

Numerical Simulation On Influence Of Confining Pressure On Dynamic Failure Process Of Roadway Containing Discontinuous Interlayer

Numerical Simulation of Mechanical Characteristics of Roadway Surrounding Rock under Dynamic and Static Loading

Investigation on Damage and Failure Mechanisms of Roadway Surrounding Rock Triggered by Dynamic–Static Combined Loads

Numerical Simulation of Rock Burst of Circular Roadway Based on RFPA Software

Physical model test and numerical simulation on the failure mechanism of the roadway in layered soft rocks

Failure Mechanism of Dynamically-Pressured Soft Rock Roadway and Control Technology

Study on the Evolution of Rock Fracture under True Triaxial Intermediate Principal Stress

Failure Mechanism of Anchored Roadway Surrounding Rocks under Near-Field Dynamic Disturbance

Experimental Study of Dynamic Mechanical Response and Energy Dissipation of Rock Having a Circular Opening Under Impact Loading

Research on Soft Rock Damage Softening Model and Roadway Deformation and Failure Characteristics

Numerical Study of Rock Failure due to the Pre-Existing Crack Initiation and Propagation and Hydraulic Fractures Interaction

Experimental and Numerical Investigation on Crack Propagation and Coalescence in Rock-Like Specimens with Fluid-Infiltrated Parallel Flaws

A New Method for Intuitively Reflecting the Deterioration Characteristics of the Rock Surrounding Roadways and Its Application Based on the Strain Softening Model

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Dynamic Response Mechanism of Impact Instability Induced by Dynamic Load Disturbance to Surrounding Rock in High Static Loading Roadway

Study on Mechanical Properties and Control Technology of Surrounding Rock in the Fracture Zone of a Roadway

Numerical study on the characteristics of roadway failure and instability in coal seam with rock parting

Experimental and numerical investigation on the mechanical responses and cracking mechanism of 3D confined single-flawed rocks under dynamic loading

Model test on failure mechanisms of deep high-stress soft rock roadways based on excavation compensation method

Comparative Study of Phase Change Theory and Zonal Fracturing Field Measurements in Deep Surrounding Rocks

Experimental research on deformation failure process of roadway tunnel in fractured rock mass induced by mining excavation