Abstract:Split-foundation (SF) building structures, as a kind of hill-side buildings, are widely used in mountainous regions due to the scarcity of plain areas. In order to experimentally investigate the seismic responses of the SF structure, shaking table test was carried out on two 1/8-scale models: a split-foundation RC frame structure supported by foundations at two different levels and a conventional RC frame structure supported by foundations at one single level. The failure patterns, dynamic characteristics, acceleration responses, displacement responses, and torsion responses of the two models were assessed and compared under seismic ground motions. The test results indicate that the two models were severely damaged after the last intensity level excitation and showed an intermediate failure mechanism. The damage to the SF model was uneven and special with relatively severe damage of the upper grounded columns. The difference in natural frequencies between the two models resulted from the effect of the lower story on lateral stiffness, and the effect was relatively dramatic in the transverse direction. The difference in structural stiffness led to larger acceleration amplification factors of the SF model and smaller acceleration amplification factors in the longitudinal direction. Although the restriction at upper ground level created a certain effect on displacement responses of the SF model especially in the first story, the curve shapes of displacement responses of the two models were similar from the first floor to fourth floor. In addition, the torsion responses of the SF model, especially in the first story (upper ground story), were obviously much larger than those of the conventional model. The torsional effect cannot be ignored in the SF structure which is a torsionally sensitive structure.

Shake Table Test On Seismic Response Of Undamaged And Damaged Rc Frame With Special-Shaped Columns

Experimental Study on the Seismic Response of Braced Reinforced Concrete Frame with Irregular Columns

Collapse tests of RC frame with sudden middle column removal

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

Shaking table test of special concentrically braced steel frame with pinned connections

Shaking table test and oretical analysis on RC frame-shear wall structures with special-shaped columns

Shaking table test of RC frame-shear wall structure with specially shaped columns

Shake Table Test for the Collapse Investigation of A Typical Multi-Story Reinforced Concrete Frame Structure in the Meizoseismal Area

Shaking Table Test on the Collapse Process of A Three-Story Reinforced Concrete Frame Structure

Shaking Table Test of a Side-Column-strengthened Prestressed Concrete Frame Structure

Shaking Table Test of RC Frame of Short-Pier Shear Wall Structure with Special-Shaped Columns

Seismic Performance Evaluation of Novel RC Frame Structure with Kinked Rebar Beams and Post-Yield Hardening Columns Through Shaking Table Tests

Full-scale shake table tests of the tension-only concentrically braced steel beam-through frame

Shaking Table Test of a Split-Foundation RC Frame Structure with One Lower Story Compared with a Conventional RC Frame Structure

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Shaking Table Test and Numerical Simulation on a Vertical Hybrid Structure under Seismic Excitation

Shaking table test of a self-centering reinforced concrete frame

Shaking table tests for aseismic performance of a controllable rocking reinforced concrete frame with column-end-hinge joints

Shaking Table Testing of the Reinforced Concrete Staggered Slab-Column Structure