Abstract:BackgroundThe investigation of reinforced concrete slabs under impact loading through the experiment is expensive and time-consuming however technological advancements enable the numerical methods to save experimental resources. The manuscript states that the numerical methods involve the selection of the material model which is quite sensitive due to the high complexity of the calibration process, especially the stress-inelastic strain behaviour and damage parameters.MethodologyWithin the context, the present study considers the five largely known stress–strain models (Alfarah et al. Model, Carreira and Chu Model, Chinese Model code (GB50010-2002), CEB-FIP Model Code 2010 and Aslani and Jowkarmeimandi Model, designated as M1, M2, M3, M4 and M5, respectively) of concrete through the Concrete Damage Plasticity (CDP) model using ABAQUS finite element software.ObjectiveThe accuracy and reliability of these five models were studied and compared for varying strength of concrete and thickness of slab with the experimental results available in the literature under low-velocity impact. The numerical models were predicted in terms of impact force, displacement, acceleration and strain in concrete as well as reinforcement. ConclusionIt was concluded that Alfarah et al. model (M1) was found to be the best predicting model in terms of impact force and midpoint displacement due to mesh insensitivity which is based on element characteristic length. The acceleration-time response was accurately captured by Alfarah et al. model (M1) and least predicted by the GB50010-2002 model (M3). Further, statistical analysis was performed to evaluate the performance of each model in predicting the factors affecting the behavior of concrete under impact loading. It was observed that model M1 was found to be the best at predicting the impact force and midpoint displacements among the chosen models. It was also observed that the Aslani and Jowkarmeimandi model (M5) was found to predict acceleration better than other models.

Parameter Study On Concrete Damaged Plastic Model Of Abaqus

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Cohesive Cracking Simulation of Concrete Using Effective Modulus

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

Impact of Failure-surface Parameters of Concrete Damage Plasticity Model on the Behavior of Reinforced Ultra-high Performance Concrete Beams

An enhanced damaged plasticity model for concrete under cyclic and monotonic triaxial compression

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads

Comparative Investigation on Influences of Concrete Material Constitutive Models on Structural Behavior

ABAQUS modeling for post-tensioned reinforced concrete beams

Calibration of a New Concrete Damage Plasticity Theoretical Model Based on Experimental Parameters

Study on the Constitutive Model of Concrete and Steel for Explicit Dynamic Beam Elements of ABAQUS

Study on a Uniaxial Constitutive Model of Concrete for Explicit Dynamic Beam Elements of ABAQUS

An improved damage-plasticity material model for concrete subjected to dynamic loading

A nonlinear concrete damaged plasticity model for simulation reinforced concrete structures using ABAQUS

Numerical simulation of impact tests on reinforced concrete beams

Evaluation of Compressive and Tensile Stress–Strain Parameters of Concrete Damage Plasticity Model for Concrete Slabs Under Impact load

A methodology for parameter identification and calibration of the cohesive element based meso-scale concrete model

Nonlinear Analysis of Reinforced Concrete Beam Bending Failure Experimentation Based on ABAQUS