Device Simulation of Organic–Inorganic Halide Perovskite/Crystalline Silicon Four-Terminal Tandem Solar Cell with Various Antireflection Materials
Peng Zhao,Man Yue,Chen Lei,Zhenhua Lin,Jie Su,Dazheng Chen,Chunfu Zhang,Jincheng Zhang,Jingjing Chang,Yue Hao
DOI: https://doi.org/10.1109/jphotov.2018.2869743
2018-01-01
IEEE Journal of Photovoltaics
Abstract:The four-terminal tandem solar cell consisting of a bottom cell, which employs crystalline silicon (c-Si) as an absorber layer, and a top cell, which employs methyl ammonium lead halide (CH3NH3PbI3 ) as an absorber layer, was constructed. In order to improve solar cell performance, antireflection layers were employed to reduce reflection and enhance photon transmission. In this study, we explored the effect of antireflection layers on tandem solar cells performance with Silvaco Atlas. According to the simulation result, it was found that the optimal thickness of c-Si and CH3NH3PbI3 was 100 μm and 600 nm, respectively. Furthermore, the effects of various antireflection materials [lithium fluoride (LiF), magnesium fluoride (MgF2), SiO2, and aluminum oxide (Al2O3)] on tandem devices were explored, and the power conversion efficiencies (PCEs) with these antireflection layers were 27.62%, 27.63%, 27.47%, and 26.75%, respectively, much higher than that of the device without the antireflection layer (26.3%). Meantime, the device with the Al2O3 antireflection layer showed the best encapsulation properties. Thus, the antireflection layer of Al2O3 with LiF, MgF2, and SiO2 combinations was employed, and PCEs of tandem solar cells can achieve 27.44%, 27.45%, and 27.32%, respectively.