Abstract:Q&P steels possessing a combination of ultra-high product of strength and tensile elongation (PSE) and superior impact toughness was obtained by tailoring the micromechanical deformation ability of retained austenite (RA) and martensite via low-temperature partitioning. Our results indicate that impact toughness is more susceptible to the heterogeneity of mechanical properties of constituent phases than its tensile mechanical properties. Through optimizing the difference between the constituent phases, the impact toughness can be improved significantly by the enhancement of micromechanical deformation ability of tempered martensite (TM) and corresponding alleviation of deformation incompatibility. Simultaneously, high PSE was preserved by using the deformation potential of RA and its transformation-induced plasticity effect. Load–unload–reload (LUR) tests were carried out to characterize the evolution of flow stress components and the influence of partitioning temperatures on the degree of deformation inhomogeneity between constituent phases during plastic deformation. Furthermore, the mechanical properties and micromechanical deformation ability of the constituent phases were quantitatively characterized using the nanoindentation technique, which indicates that degree of incompatible deformation is alleviated for steels partitioned at relatively high temperatures due to the enhancement of the deformation ability of TM. The underlying relationship between the dynamic transformation of metastable austenite based on the Olson and Cohen model, and high PSE was elucidated. As the partitioning temperature increases, the mechanical stability of RA increases, which is attributed to the synergistic effect of carbon partitioning and the improvement of compatible deformation capability of TM and RA, resulting in an excellent combination of concurrent ductility and impact toughness. Based on the above characterization and analysis, further investigation into the fractured morphology of impact and edge notched specimens was carried out to provide a comprehensive understanding of the damage and fracture mechanism, and to reveal the reasons for the improvement of mechanical properties. The nucleation position and propagation path of microvoids and microcracks depend on the deformation compatibility of constituent phases and the morphology of cementite in tempered martensite. The nucleation sites of microcracks and microvoids at the phase interface, due to stress concentration and dislocation pile-ups for incompatibility deformation of constituent phases, are substituted with nucleation sites at fractured cementite in TM with the increasing partitioning temperature.

The Mechanism Of Ductility Enhancement By Retained Austenite In High Strength Steels

A New Effect of Retained Austenite on Ductility Enhancement of Low Carbon Q-P-T Steel

A New Effect of Retained Austenite on Ductility Enhancement in High Strength Bainitic Steel

The Twice Softening of Martensitic Matrix in Q–P–T Steels and Its Effect on Ductility

The Mechanism of High Ductility for Novel High-Carbon Quenching–Partitioning–Tempering Martensitic Steel

Transformation-Induced Ductility of Reverse Austenite Evolved by Low-Temperature Tempering of Martensite

The Principle and Mechanism of Enhancement of Both Strength and Ductility of Martensitic Steels by Carbon

Enhancement Of Mechanical Properties For Quenched And Partitioned Steels Via Intragranular Austenite

The Mechanism of High Strength-Ductility Steel Produced by A Novel Quenching-Partitioning-Tempering Process and the Mechanical Stability of Retained Austenite at Elevated Temperatures

The Microstructural design and control of ultrahigh strength-ductility martensitic steels based on a novel quenching-partitioning-tempering process

Enhancement of the Strength and Ductility of Martensitic Steels by Carbon

Effect of Retained Austenite on the Dynamic Tensile Behavior of A Novel Quenching-Partitioning-Tempering Martensitic Steel

The Mechanism of High-Strength Quenching-Partitioning-Tempering Martensitic Steel at Elevated Temperatures

Enhancing Strength and Plasticity Synergy in Transformation-Induced Plasticity-Aided Lean Duplex Stainless Steel Based on the Ultrafine-Grained Austenite

Enhancement of Impact Toughness Via Tailoring Deformation Compatibility of Constituent Phases in Duplex Q&P Steel with Excellent Strength and Ductility

High Strength Ductility Steels Treated by Novel Quenching–partitioning–tempering Process

High Strength-Ductility Nb-microalloyed Low Martensitic Carbon Steel: Novel Process and Mechanism

Ultrahigh strength-ductility steel treated by a novel quenching–partitioning–tempering process

Enhancing Both Strength and Ductility of Low-Alloy Transformation-Induced Plasticity Steel Via Hierarchical Lamellar Structure

Mechanisms of strength–plasticity enhancement and stress-induced phase transition in a medium-carbon low-alloy steel

Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity steels