Abstract:Investigation of the mechanical properties and forming limit diagrams (FLDs) of Fe-0.20C-1.49Mn-1.52Si-0.58Cr-0.05Nb (wt%) steel treated by conventional quenching and tempering (Q&T) and a novel quenching-partitioning-tempering (Q-P-T) process has revealed that the latter produces more retained austenite (10.8%) than the former (less than 3%) and improves the formability. The better formability of the Q-P-T martensitic steel is attributed to a higher strain hardening exponent (n¯=0.0958) and true uniform elongation (ε¯u=10.3%) than the Q&T martensitic steel (n¯=0.0410,ε¯u=3.6%), which leads to a lower yield ratio (σs/σb) and higher plastic strain ratio (r). The high value of n is found through microstructural characterization to stem from the high strain hardening rate of the retained austenite during deformation, as well as a low dislocation density in the martensitic matrix prior to deformation due to carbon partitioning into the retained austenite during the Q-P-T process. The high εu is attributed to the dislocation absorption by retained austenite (DARA) effect, which effectively enhances the deformability of the martensitic matrix, as well as the transformation induced plasticity of retained austenite during deformation. Since there is no carbon-depletion in the single-phase martensitic matrix of the Q&T steel, it exhibits reduced formability due to a lower value of n and εu.

High Strength-Ductility Nb-microalloyed Low Martensitic Carbon Steel: Novel Process and Mechanism

High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching–partitioning–tempering process

Microstructure and Mechanical Properties of A Nb-Microalloyed Medium Carbon Steel Treated by Quenching-Partitioning Process

Characterization of Microstructure and Mechanical Properties of a Nb-Microalloyed Steel after Quenching-Partitioning-Tempering Process

Enhancement of the mechanical properties of a Nb-microalloyed advanced high-strength steel treated by quenching–partitioning–tempering process

Ultrahigh strength-ductility steel treated by a novel quenching–partitioning–tempering process

The Mechanism of High Ductility for Novel High-Carbon Quenching–Partitioning–Tempering Martensitic Steel

Microstructual Evolution of a Nb‐Microalloyed Advanced High Strength Steel Treated by Quenching‐Partitioning‐Tempering Process

Novel Ultrahigh-Strength Nanolath Martensitic Steel by Quenching–partitioning–tempering Process

Effects of Novel Q-P-T and Traditional Q-T Processes on the Microstructure and Mechanical Properties of Martensitic Steels with Different Carbon Content

Mechanism exploration of an ultrahigh strength steel by quenching-partitioning-tempering process

A Carbide-Free Bainite/martensite/austenite Triplex Steel with Enhanced Mechanical Properties Treated by a Novel Quenching–partitioning–tempering Process

The Mechanism of High Strength-Ductility Steel Produced by A Novel Quenching-Partitioning-Tempering Process and the Mechanical Stability of Retained Austenite at Elevated Temperatures

The Microstructural design and control of ultrahigh strength-ductility martensitic steels based on a novel quenching-partitioning-tempering process

Microstructural and Mechanical Properties Development During Quenching-Partitioning-Tempering Process of Nb-V-Ti Microalloyed Ultra-High Strength Steel

Study of a Novel Ultra-High Strength Steel with Adequate Ductility and Toughness by Quenching-Partitioning-Tempering Process

Enhancement of the Strength and Ductility of Martensitic Steels by Carbon

Property and Microstructure of a Novel Q-P-T Steel

Relation Between Microstructure and Formability of Quenching-Partitioning-Tempering Martensitic Steel

Microstructual Evolution of a Medium Carbon Advanced High Strength Steel Heat-Treated by Quenching-Partitioning Process

Study on the Mechanism of Excellent Strength and Toughness Combination of a High Nitrogen Martensitic Stainless Steel Treated by Q-C-P-T Process