Abstract:In high-speed multi-pair wireline communication systems, such as 10 Gigabit Ethernet over Copper (10GBASE-T), far-end crosstalk (FEXT) becomes a major impairment and needs to be suppressed to increase data rates. Conventional techniques based on crosstalk cancellation are not suitable for FEXT due to the fact that the disturbing source of FEXT is generally unknown to the victims. This paper presents two different approaches to efficiently deal with FEXT over unshielded twisted-pair (UTP) copper cables. To eliminate the error propagation problem in practice, both approaches use the Tomlinson-Harashima Precoding (THP) technique which however makes the transceiver design nontrivial. In the first approach, FEXT is treated as noise and a new feedforward FEXT canceller is proposed. Compared with conventional techniques, the proposed FEXT canceller can mitigate the non-causal part of FEXT, thus leading to better FEXT cancellation performance. In the second approach, FEXT is treated as signal, and the general multi-input multi-output (MIMO) equalization technique is combined with the TH precoding technique to deal with both intersymbol interference (ISI) and FEXT. Different from the existing works, the proposed designs comply with the 10GBASE-T standard and they are suitable in real applications. Simulation results verify that the proposed approaches can achieve much better performance in terms of decision-point signal-to-noise ratio (DP-SNR) than conventional techniques. It is also shown that the hardware complexity of the transceiver can be reduced by about 37.2% by utilizing the increased DP-SNR in the proposed designs.

Far-End Crosstalk Mitigation Using Homogeneous Dielectric Substrate in DDR5

Far-End Crosstalk Mitigation in DDR5 Using Graphene-Paraffin Material Coated Signal Lines with Tabs

Far-End Crosstalk Mitigation for Transmission Lines in DDR5 Using Glass-Weave Coating Structure

Far-End Crosstalk Mitigation for Microstrip Lines in High-Speed PCBs

Using Square Cross Structure for Far-End Crosstalk Reduction on Microstrip Signal Lines in DDR5

FEXT Reduction Using Mushroom Structures Thickened Soldermask for DDR5 PCBs

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

A simple approach to modeling substrate coupling in mixed-signal integrated circuits by TCAD

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

A Shielding Structure for Crosstalk Reduction in Silicon Interposer

Design and Simulation to Reduce the Crosstalk of Ultra-Fine Line Width/space in the Redistribution Layer

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Crosstalk Reduction in TSV Arrays with Direct Ohmic Contact Between Metal and Silicon-Substrate

Modeling and Measurement of A Novel Shielding Design in Silicon Interposer

Analysis on the Effectiveness of the 20-H Rule Using Numerical Simulation Technique

Novel FEXT Cancellation and Equalization for High Speed Ethernet Transmission

Design of metalized polyether-ether-ether-ketone based on semi-additive manufacture for 5G applications: from bottom-up assembly to selective electroplating

Parallelized Computational Technique for Signal Propagation Analysis at Very High Speed Differential Transmission Lines

3DCAM: A Low Overhead Crosstalk Avoidance Mechanism for TSV-Based 3D ICs

Crosstalk and Congestion Driven Layer Assignment Algorithm