Abstract:In order to investigate the microstructure evolution, tensile deformation mechanism and strengthening mecha-nism of Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy (HEA), the alloy samples were prepared by directional so-lidification at different solidification rates (5, 10, 20, 50 and 100 mu m/s). Results indicate that the microstructure of the directionally solidified Ni36Co30Fe11Cr11Al8Nb4 HEA is composed of primary bulky dendrites (FCC1 phase) and inter-dendritic lamellar structures which consist of the Laves phase and the Nb-enriched FCC2 phase. With the increase of solidification rate, the dendrites are refined, the volume fraction of inter-dendritic lamellar structure decreases, and Laves phase accumulates at the grain boundaries. Since FCC2 phase has lower nucleation barriers, the nucleation and growth of FCC2 phase are preferential to those of Laves phase in the inter-dendrite region. Tensile results indicate that the directionally solidified Ni36Co30Fe11Cr11Al8Nb4 HEA possesses the highest ultimate tensile strength and fracture strain at 5 mu m/s, which are 740.15 MPa and 35.23 %, respectively. The microscopic deformation behavior shows that FCC1 phase yields first, followed by FCC2 and Laves phases in sequence during tensile deformation. The moderately strong FCC2 phase coordinates the large inherent strength gap between FCC1 and Laves phases to avoid stress concentration and maintain ductility. FCC2- Laves interface plays a significant role in hindering dislocation movement and increasing the strength, the overall interfacial strengthening stress is estimated to be 9.1 GPa.

Microstructural Evolution in Directional Solidification of Nb-doped Co-Sn/Ni–Sn Eutectic Alloys

Solidification Behavior of Co-Sn Eutectic Alloy with Nb Addition

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

The Growth Pattern of Co3Sn2 in Directional Solidification of Co-Sn Hypereutectic Alloy Melts

Phase-field simulation of seaweed-like growth morphology of directionally solidified Ni-Cu alloy

Solidification Interface Morphology Pattern in the Undercooled Co–24.0at.% Sn Eutectic Melt

Effect of Nb on the Growth Behavior of Co 3 Sn 2 Phase in Undercooled Co-Sn Melts

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Microstructure evolution and solidification behaviour of Nb–16Si–22Ti–2Cr–2Al–6Hf alloy processed by directional solidification

Directional Solidification of Highly Undercooled Eutectic Ni78.6si21.4 Alloy

Phase-field simulation of binary alloy during directional solidification

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Structural Evidence for the Transition from Coupled to Decoupled Growth in the Solidification of Undercooled Ni-Sn Eutectic Melt

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Microstructure evolution and mechanical properties of directionally solidified Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy

Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy

Solidification Process and Microstructure Evolution of Bulk Undercooled Co–Sn Alloys

Revealing the Nucleation and Growth Modes Upon Rapid Solidification of Undercooled Co-24 At.% Sn Eutectic Alloy by the Crystallographic Orientation Relations

Preferred Growth Orientation and Microsegregation Behaviors of Eutectic in a Nickel-Based Single-Crystal Superalloy

Microstructure and microsegregation in directionally solidified Ti-46Al-8Nb alloy - TNMSC