Abstract:Two series of copolyimides were designed and synthesized by one-step polycondensation of two diamines, 3,6-diaminoacridine (Acridine) and 4,4′-(9H-fluoren-9-ylidene)bisphenylamine (FBPA), with a dianhydride 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) or 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), respectively. The copolyimides were named as AFFx (Acridine-FBPA-6FDA polyimide) and AFBx (Acridine-FBPA-BTDA polyimide), respectively, where x (x=0, 1, 3, 5 10, 15 and 20) represents the mole percentage of acridine among the sum of two diamines. Characterization of the polymers was conducted by using FT-IR, EA, GPC, TGA, DSC, UV–vis and FL techniques. The Mw and MWD of AFFx are in the range of 2.29–5.09×104 and 1.93–2.72, respectively, as determined using GPC. AFFx could be dissolved in some low boiling point solvents such as THF, CH2Cl2, CHCl3, etc. Thin AFFx films could be prepared by spin coating its CHCl3 or THF solution onto glass. The temperature of 10% weight loss (T10) for the copolyimides was above 540°C. The emission maximum of AFFx in solution at the excitation wavelength of 480nm was near 545nm. And that of AFBx solution at the excitation wavelength of 390nm was near 525nm. UV–vis and FL spectra of the copolyimides indicated that the main chromophores in the copolyimides were acridine moieties and the excitation energy transfer from fluorene moieties to acridine moieties could take place. The copolyimides maybe a potential thermostable light-emitting material for organic light-emitting diodes.

Synthesis and Properties of Thermotropic Copoly(Ester Imide)S

Synthesis and Characterization of Thermotropic Liquid Crystalline Poly(ester Imide)s

STRUCTURE AND PROPERTIES OF A NEW TYPE OF THERMOTROPIC LIQUID CRYSTALLINE POLY(ESTER IMIDE)S WITH NAPHTHALENE UNITS

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Synthesis and characterization of thermotropic liquid crystalline copolyester containing bis(4-hydroxyphenyl) methanone series (I)

Polyether–polyimide Thermoplastic Elastomers. I. Synthesis and Properties

Synthesis and Characterization of Copolyesters Containing Bis(4-hydroxyphenyl) Methanone

Structure and Properties of Thermoplastic Polyimide Based on 4', 4'-(Oxybis (methylene)) Bis ([1.1'- Bipheny]3-Amine) Diamine

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Synthesis and Properties of Some New Polyimides Containing Bithiazole Rings

Synthesis and Optical Properties of Two Series of Soluble Acridine-Containing Copolyimides

WAXD study on thermotropic liquid crystal poly ester imide)s

SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC POLYAMIDE LIQUID CRYSTALLINE BLOCK COPOLYMERS

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Syntheses and properties of 1,4-bis[4-(2-amino-5-phenyl)thiazoleyl] benzene and its polyimides

Synthesis and characterization of a novel kind of thermotropic liquid crystalline poly(urea-ester)s based on bis(4?-hydroxyphenyl)-tolyene-2,4-diurea

Synthesis of Polyimide-Siloxane Copolymers and Their Properties

Synthesis and comparative study of thermoplastic polyetherimides derived from hydroquinone diphthalic anhydride isomers with tert -butyl group

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Preparation and characterization of aromatic polyimides derived from 4,4′-oxydiphthalic anhydride and 4,4′-diaminodiphenylmethane with different alkyl substituents

MD analysis on structure and property of thermosetting polyimides end-capped by phenylethynyl groups