Abstract:In this study, the microstructural changes in irradiated W-1 wt%Pr2O3, W-1 wt%La2O3, W-1 wt%TiC and W-1 wt%ZrC specimens by 1 MeV Fe+ ion irradiation to doses of 1 dpa at room temperature have been characterized by transmission electron microscopy (TEM) to understand the radiation damage. The specimens of 1 dpa were consecutively annealed at temperatures of 600 degrees C, 800 degrees C, 900 degrees C and 1100 degrees C for 1h, and the post-irradiation annealing effect on the microstructure was studied. Microstructural features such as dislocations, dislocation loops and dense dislocation networks were observed by the means of TEM. There was a significant change in the microstructure of the tungsten (W) after irradiation and post-irradiation annealing. W-1 wt%TiC likely consisted of fewer radiation-induced defects and hence exhibits higher resistance to radiation-induced microstructural changes than the others. The general trend is that the density of defect clusters decreases while the average size of the clusters increases with the annealing temperature. A complete removal of dislocation structures at 1100 degrees C occurred in all materials. The irradiation damage effect of Fe+ ions on the deuterium retention of as-synthesized W-based composites was investigated. Thermal desorption spectroscopy of W implanted with D-2 (-) ions was performed using the low-energy ion irradiation system of Kyoto University. Compared with the samples without Fe preirradiation, the deuterium retention of the four composites increased after Fe+ pre-irradiation. The retained amount of deuterium was also increased with the increase in the Fe+ irradiation dose. This is of vital importance to the scientific community working on these materials for extreme irradiating environments.

Effects of Mo/Zr Addition on Deuterium Retention in W-Y2O3 Alloys

D2 retention behavior and microstructural evolution of W-2wt.%Y2O3 alloy during He-ion irradiation at high temperatures

Enhancing Disproportionation Resistance of Zr2Co-based Alloys by Regulating the Binding Energy of H Atom

Effects of Zr/Mo Addition on He Bubble Formation in Y2O3-added W Alloys

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3 Exposed to Deuterium Plasma

An Alloying Element Screening Method to Design Zr2Co Based Alloys with Superior Disproportionation Resistance

Deuterium retention in W and binary W alloys irradiated with high energy Fe ions

Effects of Zirconium Element on the Microstructure and Deuterium Retention of W–Zr/Sc2O3 Composites

TEM Studies of 1 MeV Fe+ Ion-Irradiated W Alloys by Wet Chemical Method: High-Temperature Annealing and Deuterium Retention

Microstructure Evolution and Effect on Deuterium Retention in Oxide Dispersion Strengthened Tungsten During He+ Irradiation

Deuterium Irradiation Resistance and Relevant Mechanism in W–ZrC/Sc2O3 Composites Prepared by Spark Plasma Sintering

Microstructure Evolution and Effect on Deuterium Retention in TiC- and ZrC-Doped Tungsten under He+ Ion Irradiation

Effect of 5 MeV Au3+ ions irradiation damage on surface blistering and deuterium retention behaviors in W and W-ZrC alloy

Irradiation hardening and deuterium retention behaviour of tungsten under synergistic irradiations of 3.5 MeV Fe 13+ ions and deuterium plasma

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Influence of a small amount of Al2O3 addition on the transformation of Y2O3-partially stabilized ZrO2 during annealing

Influence of Zr on grain orientation, texture, and mechanical properties in hot- and warm-rolled FeCrAl alloys

Suppression of vacancy formation and hydrogen isotope retention in irradiated tungsten by addition of chromium

Superior Radiation Resistance of ZrO2-Modified W Composites

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation

Investigation of the Y Effect on the Microstructure Response and Radiation Hardening of PM V-4Cr-4Ti Alloys after Irradiation with D Ions