Abstract:For the traditional preparation method, it is challenging to fabricate a supported nickel catalyst with fine size at high loading. In this work, a group of La-modified mesostructured cellular foam (MCF)-derived nickel phyllosilicates was designed and synthetized by a hydrothermal method followed by an impregnation-modification of La2O3, whose Ni contents varied from 25.3 to 32.2 wt %. Both the special property of phyllosilicate and the addition of a La2O3 modifier played significant roles in achieving high Ni dispersion and excellent catalytic performance. The formed nickel phyllosilicate was beneficial to obtain small Ni nanoparticles (<5 nm) due to its strong metal-support interaction and high specific surface area; the addition of the La2O3 modifier could further reduce the Ni particle size and decrease the reduction difficulty of the fabricated samples. On the contrary, a large Ni particle size of 13.0 nm was observed on the impregnated Ni/MCF (N/M-Im) catalyst with a Ni content of 31.7 wt %. As a result, the nickel phyllosilicate catalyst showed higher catalytic activity than the impregnated one, and the La modifier could further improve the catalytic activity especially at low temperature (<400 °C). Among all catalysts, the modified phyllosilicate catalyst N/M-P-32-5L with 180 °C-32 h-hydrothermal treatment and La2O3 content of 5 wt % was the best owing to its small-sized Ni particles, high H2 and CO2 chemisorption capacity, large turnover frequency (TOF) value, and low activation energy of 69.83 kJ mol-1. In addition, the intermediates of formate and CO were detected through in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis. In a 100 h-lifetime test under harsh conditions and 600 °C-steam treatment, N/M-P-32-5L showed both high sintering resistance of Ni particles and high thermal stability without the collapse of pores as well as decrease of catalytic activity, which was attributed to the special physical and chemical properties of MCF-derived nickel phyllosilicate, strong metal-support interaction over the catalyst, and the promotion of the La2O3 modifier.

Nickel Phyllosilicate Derived Ni/Sio2 Catalysts For Co2 Methanation: Identifying Effect Of Silanol Group Concentration

Highly Efficient Ni-Phyllosilicate Catalyst with Surface and Interface Confinement for CO<sub>2</sub> and CO Methanation

Enhanced stability of Ni/SiO2 catalyst for CO2 methanation: Derived from nickel phyllosilicate with strong metal-support interactions

Silicon–nickel intermetallic compounds supported on silica as a highly efficient catalyst for CO methanation

Inducing Ni Phyllosilicate Formation over a Carbon Fiber Support As a Catalyst for the CO2 Reforming of Methane

Lanthanum-Modified MCF-Derived Nickel Phyllosilicate Catalyst for Enhanced CO2 Methanation: A Comprehensive Study

Which is the better catalyst for CO2 methanation – Nanotubular or supported Ni-phyllosilicate?

Revealing the Anti-Sintering Phenomenon on Silica-Supported Nickel Catalysts During CO2 Hydrogenation

Highly Carbon-Resistant Ni–Co/SiO2 Catalysts Derived from Phyllosilicates for Dry Reforming of Methane

Silica/Titania Composite-Supported Ni Catalysts for Co Methanation: Effects of Ti Species on the Activity, Anti-Sintering, and Anti-Coking Properties

Enhanced Performance and Selectivity of CO2 Methanation over Phyllosilicate Structure Derived Ni-Mg/SBA-15 Catalysts

An active and stable nickel-based catalyst with embedment structure for CO2 methanation

The Effect of Si on CO<sub>2</sub> Methanation over Ni-xSi/ZrO<sub>2</sub> Catalysts at Low Temperature

The Effect of Si on CO2 Methanation over Ni-xSi/ZrO2 Catalysts at Low Temperature

CO2 Methanation Using Multimodal Ni/SiO2 Catalysts: Effect of Support Modification by MgO, CeO2, and La2O3

CO Methanation over Ni/SiO2 Catalyst Prepared by Ammonia Impregnation and Plasma Decomposition

Promotion effect of TiO2 on Ni/SiO2 catalysts prepared by hydrothermal method for CO2 methanation

Methanation over Ni/SiO2: Effect of the Catalyst Preparation Methodologies

Clarification of Active Sites at Interfaces Between Silica Support and Nickel Active Components for Carbon Monoxide Methanation

The construction of nanotubular Ni-Mg phyllosilicate solid solution catalyst for boosting CO 2 catalytic conversion: Identifying the species variations and interactions

Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation