Abstract:RC flat-slab is widely regarded as one of the mainstream design solutions in commercial engineering projects due to its flexibility and the characteristic of maximization of floor-to-floor height. However, RC slab-column connections are vulnerable to punching shear failure due to the brittle tensile behavior of standard concrete. Engineered cementitious composites (ECC) have greater ductility than standard concrete which makes it ideal for slab-column connections. In this study, five RECC slab-column connections, which have different reinforcement ratios (rho) and span ratios (lambda), were tested under concentric gravity load to investigate their failure behaviors. Reinforcement ratios of rho = 0.2%, 0.6%, 1.4% and 2.3%, as well as span ratios of lambda = 8.4 and 5.7 were considered. Flexural strengths V-flex of specimens were estimated based on yield-line theory, and punching shear strengths V-pun of specimens were estimated by empirical formulas of ACI and JSCE codes. The main conclusions obtained in this study are as follows: (1) At a fixed span ratio of lambda = 8.4, specimen with rho = 0.2% experienced premature flexural failure after yielding reinforcement, while specimens with rho = 0.6% and 1.4% both experienced flexural-triggered punching shear failure. In addition, premature punching shear failure occurred in rho = 2.3% specimen. For specimens with lambda = 5.7 and rho = 1.4%, the flexural-triggered punching shear failure was also exhibited. (2) The ductility ratios of specimens with flexural-triggered failure modes (i.e. premature flexural failure and flexural-triggered punching shear failure) varied from 1.63 to 6.4. Premature flexural failure has the lowest ductility ratio of 1.63 amongst the flexural-triggered failure modes. Additionally, punching shear failure has the lowest ductility ratio of all the failure modes, which is close to 1.0. (3) The lesser of V-flex and V-pun was adopted as the estimated ultimate load, the errors between the test results and the estimated values are within 15%. (4) Flexural-triggered failure modes or strong-shear-weak-bending design can be achieved by making V-pun > V-flex through restricting the maximum reinforcement ratio. Premature flexural failure can be avoided by limiting the minimum reinforcement ratio.

Comparative study of reinforced-engineered cementitious composites and reinforced-concrete slab–column connections under a vertical monotonic load

Shear Capacity of a RC Bridge Deck Slab: Comparison Between Multilevel Assessment and Field Test

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Experimental Investigation on Failure Modes of RECC Slab-Column Connections under Concentric Gravity Loading

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Experimental study on seismic behavior of precast concrete column with longitudinal reinforcement grouting-anchoring connections

Experimental studies of the bearing capability of a type of steel-concrete composite slab

Mechanical behaviours of ECC-encased CFST composite column-RECC ring beam connections under axial and eccentric loading

The Effect of ECC Materials on Seismic Performance of Beam—Column Subassemblies with Slabs

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Theoretical and finite element analysis of concrete filled steel tube columns‐steel reinforced ECC ring beam connections

Investigation of the punching shear behaviors of reinforced concrete slab–steel reinforced concrete L-shaped column connections

Experimental study on the axial compressive performance of prefabricated steel reinforcement cage‐cast‐in‐situ concrete column with an innovative sleeve

Seismic Performance of Flexure-Dominated Reinforced-Engineered Cementitious Composites Coupled Shear Wall

Experimental study on the axial compressive behaviour of steel reinforced concrete composite columns with stay-in-place ECC jacket

Cyclic Axial Compressive Performance of the RC Columns Reinforced with FRP Confined Concrete Core Encased Rebar

Preliminary research on mechanical performance of composite joints with flush endplate connections and RC slab

Experimental Study on Eccentric Compressive Performance of Concrete Column Strengthened with CFRP Grid Reinforced ECC Matrix

Punching shear tests and design of UHTCC-enhanced RC slab-column joints with shear reinforcements

Test Study on Resistance of Reinforced Beam-to-Column Connections with Cover-Plate Under Loads in Steel Frame