Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Analysis on the Effect of Superconductor Layer Thickness on the AC Loss of Conductor on Round Core (CORC) Cables

Analysis of AC Transport Loss in Conductor on Round Core Cables

Effect of Core Materials on the Electrical Properties of Superconducting Conductor on Round Core Cable

Understanding and minimizing ac losses in CORC cables of YBCO superconducting tapes

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

Analysis of Mechanical Properties of Each Layer of Superconducting Tape of Multi-Layer CORC Cable under Transverse Compression Load

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

A Simplified Model of the Field Dependence for HTS Conductor on Round Core (CORC) Cables

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Influence of HTS tape arrangement on the transverse compression performance of copper former CORC cables

Numerical study on the electromagnetic characteristics of multi-layer CORC cables

Effect of Core Structure on the Mechanical and Electromagnetic Properties of High-Temperature Superconducting Cables

Analysis on the Transverse Compression Performance of the CORC Cable

Mechanical Response of Conductor on Round Core (CORC) Cables Under Electromagnetic Force

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

A method to model the electromagnetic performance of bent CORC® wires for SMES magnets

Fundamental study on performances of fiber-superconducting composite CORC cable: Electromagnetic, thermal, mechanical and quench behaviors