Abstract:Carbon nanotubes (CNTs) have outstanding characteristics including high mechanical properties, namely tensile strength and elastic modulus,and still remarkable flexibility, excellent thermal and electric conductivities, low percolation thresholds (loading weight at which a sharp drop in resistivity occurs) and high aspect ratios (length to diameter ratio, L/D) while the latter provides the nanotubes with additional advantage over spherical fillers to obtain high property composites. Therefore I CNTs have the potential to act as a reinforcing filler of polymer matrices. The tetraglycidyl-4,4'-diaminodiphenylmethane (TGDDM) cured with 4,4'-diaminodiphenylsulphone WDS) and filled with graphite or carbon fibers are commonly used as a polymeric matrix in high performance composites employed in the aircraft and spacecraft industries. In present paper, multi-walled carbon nanotubes (MWNTs) as a nano-filler were incorporated in the TGDDM/DDS epoxy. The thermal properties of the composites were studied by differential scanning calorimetry (DSC), dynamic thermal analysis (DMTA) and thermal gravitimetric analysis TGA). In addition, the dispersion of MWNTs in the epoxy was also investigated by scanning electron microscopy SEM). In DSC studies, Kissinger and Flynn-Wall-Ozawa (FWO) methods were used to study the nonisothermal cure kinetics of the MWNTs filled TGDDM/DDS composites at different heating rates. The activation energy (E.) of cure reactions of the MWNTs filled epoxy composites was obtained by Kissinger and FWO methods. For all composites, the E. obtained by Kissinger method was slightly less than that of FWO method. With the addition of MWNTs, the E. of the epoxy composites decreased first and then increased with the increase of the MWNTs contents. These results showed that the incorporation of carbon nanotubes accelerated the cure reaction of the TGDDM/DDS epoxy at lower MWNTs content due to the interaction between the hydroxyl groups on the surface of nanotubes and the epoxy. However, due to the high surface energy of carbon nanotubes, the viscosity of MWNTs/epoxy composites increased at higher MWNTs content. Hence, the mobility of hydroxyl groups was hindered, and the reaction energy of composites increased with increasing MWNTs contents. The influence of carbon nanotubes on the thermal stability of the epoxy was studied by TGA. It is shown that MWNTs had little influence on the thermal stability of the cured epoxy. The storage modulus and glass transition temperature of MWNTs filled TGDDM/DDS were investigated by DMTA. It is seen that the storage modulus of TGDDM/DDS system was enhanced with the increasing of MWNTs content, that is, the modulus increased 6.3% and 7.8% at 1 wt % and 5 % MWNTs content, respectively. The glass transition temperature of the epoxy slightly decreased. Furthermore, the DMTA results of MWNTs/TGDDM/DDS composites were compared with that of carbon narrofibers (CNFs)/TGDDM/DDS composites. It was shown that the interactions between CNFs and epoxy were better those between that MWNTs and epoxy. The dispersion of carbon nanotubes in the epoxy was studied by SEM. The SEM results suggest that of MWNTs had poor dispersion in the cured epoxy. However, the radii of carbon nanotubes in the epoxy were greater than those of pure nanotubes. These results show the existence of interaction between carbon nanotubes and epoxy.

Effect of Nanodiamonds and Multi‐walled Carbon Nanotubes in Thermoset Hybrid Fillers System: Rheology, Dynamic Mechanical Analysis, and Thermal Stability

Diamond Nanothread As A New Reinforcement for Nanocomposites

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

Thermoanalytical Studies of High Performance Epoxy/Carbon Nanotube Composites

The influence of functionalized MWCNT reinforcement on the thermomechanical properties and morphology of epoxy nanocomposites

Effects of Amino‐functionalized Carbon Nanotubes on the Properties of Amine‐terminated Butadiene–acrylonitrile Rubber‐toughened Epoxy Resins

Thermo-Physical Properties of Epoxy Nanocomposites Reinforced with Amino-Functionalized Multi-Walled Carbon Nanotubes

Dispersion Stability of Functionalized MWCNT in the Epoxy–amine System and Its Effects on Mechanical and Interfacial Properties of Carbon Fiber Composites

Effect of nanodiamond particles on the structure, mechanical, and thermal properties of polymer embedded ND/PMMA composites

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids

Thermo-Mechanical Performance of Epoxy Hybrid System Based on Carbon Nanotubes and Graphene Nanoparticles

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Harnessing the thermo-mechanical properties and toughness of MWCNT/TiO2 hybrid epoxy nanocomposites

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Reinforcement of Aminopropyl-Terminated Siloxane-Treated Carbon Nanotubes in Epoxy Thermosets: Mechanical and Thermal Properties

Crystallization and Rheological Behaviors of Amino-Functionalized Multiwalled Carbon Nanotubes Filled Polyamide 6 Composites

Thermomechanical properties of multifunctional polymer hybrid nanocomposites based on carbon nanotubes and nanosilica

Effect of hydrophilically functionalized carbon nanotubes on the reinforcement of water-borne epoxy resin.