Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Dextran Sulfate Lithium As Versatile Binder to Stabilize High‐Voltage LiCoO2 to 4.6 V

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Preventing the Distortion of CoO6 Octahedra of LiCoO2 at High-Voltage Operation of Lithium-Ion Battery: An Organic Surface Reinforcement

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration

Improving the Stability of High-Voltage Lithium Cobalt Oxide with a Multifunctional Electrolyte Additive: Interfacial Analyses

Ionic-conductive poly (vinylidene fluoride) polymer as a versatile binder to stabilize high-voltage LiCoO2 cathode materials

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Engineering the Surface of LiCoO 2 Electrodes Using Atomic Layer Deposition for Stable High-Voltage Lithium Ion Batteries

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

Bimetallic synergistic modified layer promotes the cyclic stability of LiCoO 2 under 4.6 V high voltage

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Phytate Lithium as Multifunctional Additive Stabilizes LiCoO2 to 4.6 V

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Ultrahigh‐voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification