Abstract:Millions of tons of cotton textile waste are generated annually worldwide, and most of it enters the municipal solid waste (MSW) stream for landfill or incineration disposal, resulting in a significant waste of resources and environmental pollution. This article developed an innovative low-temperature pyrolysis process for producing artificial humic acid (HA) from waste cotton textiles. Subsequently, Al 3 + was introduced for a secondary pyrolysis to prepare an Al-doped biochar (Al/BC) with superior adsorption properties. The experimental results show that the presence of Al 3 + has an important influence on the pyrolysis process of cotton fabric and the formation and structure of Al/BC. This is the first time to synthesize low-cost adsorbent by pyrolysis and aluminum mixing process of waste cotton cloth and explains the mechanism. This increased in defects ( I D / I G = 0.76 to I D / I G = 0.92), a larger specific surface area (6.47 m 2 /g to 566.94 m 2 /g), and an increase in oxygen- containing functional groups (from none to C-O-C, O - - C-O, etc.) when compared to the undoped Al 3 + bio- char. The optimum Al 3 +-doped biochar (Al/BC-15) prepared with HA as a precursor exhibited a superior adsorption capacity for Cr(VI) of up to 176.23 mg/g, surpassing the results reported for similar materials in the literature. The adsorption mechanism of Cr(VI) is primarily based on physical adsorption, with some chemical adsorption. At a lower pH, the Al/BC-15 surface exhibits a high positive charge (46 mV). The Al 3 +-O-Cr(VI) association group is formed through rapid electrostatic attraction between C-Al and Cr(VI). Due to the strong positive electronegativity of Al 3 + and the negative electronegativity of C in the vicinity of Al, Cr(VI) is further reduced to Cr(III) by C-Al. Therefore, the method proposed in this paper for preparing Al-doped carbon materials from waste cotton fabric offers a new approach and potential application for the production of high-performance adsorbent materials from waste cotton fabric.

Preparation of Cotton Fibers Modified with Aromatic Heterocyclic Compounds and Study of Cr(VI) Adsorption Performance

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation and performance analysis of chitosan/polyacrylamide/poly(vinyl alcohol)/Fe/glutaraldehyde copolymer for Cr(VI) adsorption

Functionalized cotton via surface-initiated atom transfer radical polymerization for enhanced sorption of Cu(II) and Pb(II)

Enhanced removal of aqueous Cr(VI) using optimized Fe complex on EDTA modified cotton fiber via photocatalytic reduction and adsorption hybrid functions

Preparation of Al-doped Carbon Materials Derived from Artificial Potassium Humate Prepared from Waste Cotton Cloth and Their Excellent Cr(VI) Adsorption Performance

In-Depth Sulfhydryl-Modified Cellulose Fibers for Efficient and Rapid Adsorption of Cr(VI)

Modified Water Hyacinth Functionalized with Citric Acid as an Effective and Inexpensive Adsorbent for Heavy Metal-Ion Removal

Amidoxime-Modified Polyacrylonitrile Nanofibers and Application to Cr (vi) Ions Adsorption

Dual Function of Modified Palm Leaf Sheath Fibers in Adsorbing Reactive Yellow 3 and Cr(VI) From Dyeing Wastewater

Synthesis of amidoximated polyacrylonitrile fibers and its use as adsorbent for Cr (VI) ions removal from aqueous solutions

Novel montmorillonite/jute composites functionalized with polyethyleneimine and cetyltrimethylammonium bromide for Cr(VI) adsorption

Co-pyrolysis of polyester and cotton via thermogravimetric analysis and adsorption mechanism of Cr(VI) removal by carbon in aqueous solution

Novel modified semi-carbonized fiber prepared using discarded clothes for derisking Cu(II) and Pb(II) contaminated water

Synthesis of Novel Aminated Cellulose Microsphere Adsorbent for Efficient Cr(VI) Removal

Removal of Heavy Metal Ions and Anionic Dyes from Aqueous Solutions Using Amide-Functionalized Cellulose-Based Adsorbents.

Sustainable Disposal of Cr(VI): Adsorption–Reduction Strategy for Treating Textile Wastewaters with Amino-Functionalized Boehmite Hazardous Solid Wastes

Preparation and Adsorption Performance of a Cellulosic‐adsorbent Resin for Copper(ii)

Ultra-high capacity and anti-interference for Cr(VI) removal by tannin-polyvinylimine modified graphite carbon nitride

Adsorption Behavior of Hexavalent Chromium in Aqueous Solution by Polyvinylimidazole Modified Cellulose.

Use of amino-modified cotton fibers loaded with copper ions for anionic dye removal under batch and fixed-bed systems: A comparative study