Abstract:Stress induced nanoscale martensitic transformation (SINMT) as well as its effect on mechanical behaviors have been investigated for Ti2448 single crystal in compression along [100] orientation by decreasing sample size to micron-to nano scales which possess high stress due to "smaller, stronger" in metals to trigger SINMT. The transformation process of beta (BCC)-> O ' (Orthorhombic)->alpha" (Orthorhombic) involving {011}011 beta shuffle followed by {211}111 beta shear was directly observed by high resolution transmission electron microscopy (HRTEM). Real-time recording of phase transition by in-situ HRTEM in 90 nm pillar clearly reveals that this SINMT with a critical stress 1206 MPa is high-order-like (continuous) and reversible. Its competition and interaction with dislocation avalanche exhibited a strong size-dependence upon uniaxial compression, inducing a transition from dislocation avalanche to SINMT with decreasing of the pillar size from 2.5 mu m to 90 nm, evidenced by scanning electron microscopy (SEM) and HRTEM. According to the results from uniaxial compression, scanning electron microscopy (SEM) and HRTEM, deformation behaviours and mechanical properties of Ti2448 pillars ranging from 2.5 mu m to 90 nm exhibit strong size-dependence due to the competition and interaction between the dislocation avalanche and the SINMT. Owing to the "smaller, stronger" size effect, Ti2448 sub-micron pillars possess high stress to induce plenty of nanoscale alpha" martensites during loading which can effectively impede dislocation avalanche. Ti2448 sub-micron pillars (d <1 mu m) deform in homogenous mode and show an excellent combination of ultrahigh strength (1635 MPa) and plastic stability. By contrast, in micron scale (d >= 1 mu m) dislocation avalanche dominates the deformation, leading to the plasticity instability.

Differences In Deformation Behaviors Caused By Microband-Induced Plasticity Of [001]- And [111]-Oriented Austenite Micro-Pillars

Differences in Deformation Behaviors Caused by Microband-Induced Plasticity of [0 0 1]- and [1 1 1]-Oriented Austenite Micro-Pillars

Deformation Behavior and the Mechanism of Micro-Scale Ti-10v-2fe-3al Pillars in Compression

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Geometry effect on mechanical behavior of titanium micro-pillars

Deformation behavior during micro-pillar compression in an ordered phase strengthened single crystalline Ni–Cr–Mo micropillars at room temperature

Strain Rate-Induced Plasticity in Bcc Β-Ti Alloy Single Crystal Micropillars Containing Brittle Ω-Precipitates

An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests

Microband-Induced Plasticity in a Nb Content Fe-28Mn-10Al-C Low Density Steel

Transition from Homogeneous-Like to Shear-Band Deformation in Nanolayered Crystalline Cu/amorphous Cu–Zr Micropillars: Intrinsic Vs. Extrinsic Size Effect

Revealing Orientation-Dependent Martensitic Transformation in a Medium Mn Steel by Micropillar Compression

In Situ TEM Investigation of the Mechanical Behavior of Micronanoscaled Metal Pillars

Focused Ion Beam-Induced Displacive Phase Transformation From Austenite to Martensite during Fabrication of Quenched and Partitioned Steel Micro-Pillar

On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800

Tensile Behaviors and Strain Hardening Mechanisms in a High-Mn Steel with Heterogeneous Microstructure

Excellent dynamic properties and corresponding deformation mechanisms in a microband-induced plasticity steel with dual-heterogeneous structure

A micropillar compression investigation into the plastic flow properties of additively manufactured alloys

In situ micropillar compression of an anisotropic metal-organic framework single crystal

Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression

Achieving Ultrahigh Strength with Stable Plasticity by Stress-Induced Nanoscale Martensitic Transformation in Ti2448 Sub-Micron Pillars